How to remove and install the ignition lock cylinder and ignition switch on 1990 Mazda B2200?

Disconnect the battery ground cable, remove steering column covers, and disconnect the ignition switch wiring. Remove retaining screws and lift out the switch. For installation, position the lock cylinder in LOCK, align the switch with the actuating rod, torque retaining nuts to 5-7 Nm, then reconnect wiring and reassemble in reverse order.

Genuine 1990 Mazda B2200 Ignition Lock Cylinder

Ignition Key Lock Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Lock Cylinders found

View related parts
1990 Mazda B2200 Ignition Lock Cylinder Part Number: UE55-76-290F
$278.73 MSRP: $371.70
You Save: $92.97 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: KEY SET (A/T); Ignition Assembly
- Item Weight: 1.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: UE55-76-290F
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 1990 Mazda B2200 Submodels:
- Base, LE-5, SE-5 | 4 Cyl 2.2 L GAS
View related parts
1990 Mazda B2200 Ignition Lock Cylinder Part Number: UE54-76-290E
$291.08 MSRP: $388.17
You Save: $97.09 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: KEY SET (M/T); Ignition Assembly
- Replaces: UE54-76-290C
- Item Weight: 1.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: UE54-76-290E
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 1990 Mazda B2200 Submodels:
- Base, LE-5, SE-5 | 4 Cyl 2.2 L GAS

1990 Mazda B2200 Ignition Lock Cylinder Parts and Q&A

Q: How to remove and install the ignition lock cylinder and ignition switch on 1990 Mazda B2200?
A: Disconnect the battery ground cable, remove steering column covers, and disconnect the ignition switch wiring. Remove retaining screws and lift out the switch. For installation, position the lock cylinder in LOCK, align the switch with the actuating rod, torque retaining nuts to 5-7 Nm, then reconnect wiring and reassemble in reverse order.