My Garage
Cart

Genuine 1992 Mazda 626 Fuel Tank

Gas Tank
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Tank found

  • 1992 Mazda 626 Fuel Tank - GJ21-42-110G
    Diagram for 1992 Mazda 626 Fuel Tank - GJ21-42-110G
    View related parts
    Product Specifications
    • Item Weight: 26.50 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: GJ21-42-110G
    • Warranty: This genuine part is guaranteed by Mazda's factory warranty.
    Fits the following 1992 Mazda 626 Submodels:
    • DX, GT, LE, LX, Turbo, Turbo 4WS | 4 Cyl 2.2 L GAS

1992 Mazda 626 Fuel Tank Parts and Q&A

  • Q: Should repairs to the fuel tank or filler neck be carried out by a professional due to the risks of explosive fumes and potential ignition on 1992 Mazda 626?
    A: Drain the cooling system and then take the timing belt covers and the belt off. Disassemble water pump hose of the inlet pipe and the bolts of the water pump. Pry on the water pump with a large screwdriver or a pry bar that is appropriate to use and use a rocking motion to disengage the pump O-ring. Having the water pump bent forward, loosen the bolts and take the water inlet pipe off the engine, then take the pump out of the engine compartment. Wipe all gasket material off all mounting surfaces and examine O-ring gasket groove. Coat O-ring with petroleum jelly and place it with the groove and sealant on both sides of the gaskets before placing the O-ring. Install the water pump in position and install two of the retaining bolts with fingers, then install the remaining bolts and screw them all evenly in a criss cross fashion up to the required torque. Install the hose of the inlet pipe and the timing belt and covers. Refill the cooling system with 50 per cent water and coolant.

Related 1992 Mazda 626 Parts