How to test the oil pressure switch and How to remove and install on 1998 Mazda Millenia?

To test the oil pressure switch, fit an ohmmeter between the switch and the ground in continuity with the engine off and running. Unscrew the wire harness, switch the ignition ON, and test the oil pressure warning lamp. Should there be any misreadings, check an oil pressure test and change the switch. To install, use sealant and screw the switch.

Genuine 1998 Mazda Millenia Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
1998 Mazda Millenia Oil Pressure Sending Unit Part Number: B367-18-501B
$24.51 MSRP: $32.69
You Save: $8.18 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Oil
- Replaces: B367-18-501, FS11-18-50X, B367-18-501A
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: B367-18-501B
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 1998 Mazda Millenia Submodels:
- Base, L, Millennium Edition, S | 6 Cyl 2.3 L GAS, 6 Cyl 2.5 L GAS

1998 Mazda Millenia Oil Pressure Switch Parts and Q&A

Q: How to test the oil pressure switch and How to remove and install on 1998 Mazda Millenia?
A: To test the oil pressure switch, fit an ohmmeter between the switch and the ground in continuity with the engine off and running. Unscrew the wire harness, switch the ignition ON, and test the oil pressure warning lamp. Should there be any misreadings, check an oil pressure test and change the switch. To install, use sealant and screw the switch.