How to properly remove and install an axle shaft on 2012 Mazda MX-5 Miata?

Assuming the availability, loosen the rear wheel lug nuts and axle shaft hub locknut. Put the vehicle on jackstands and then take the wheels out. Take out the axle shaft hub locknut and then disconnect the axle shaft with the hub. Record inner CV joint association prior to removal. The opposite is installation where proper torque and lubrication is done.

Genuine 2012 Mazda MX-5 Miata Axle Shaft

Car Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Axle Shafts found

View related parts
2012 Mazda MX-5 Miata Axle Assembly Part Number: MA04-25-50XB
$672.61 MSRP: $919.05
You Save: $246.44 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft(Right), Rear Drive
- Position: Right
- Replaces: MA04-25-50XA
- Item Weight: 16.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MA04-25-50XB
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 2012 Mazda MX-5 Miata Submodels:
- 25th Anniversary Edition, Base, Club, Club Spec, Grand Touring, Special Edition, Sport, SV, Touring | 4 Cyl 2.0 L GAS
View related parts
2012 Mazda MX-5 Miata Axle Assembly Part Number: MA04-25-60XB
$443.71 MSRP: $596.49
You Save: $152.78 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft(Left), Rear Drive
- Position: Left
- Replaces: MA04-25-60XA
- Item Weight: 16.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MA04-25-60XB
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 2012 Mazda MX-5 Miata Submodels:
- 25th Anniversary Edition, Base, Club, Club Spec, Grand Touring, Special Edition, Sport, SV, Touring | 4 Cyl 2.0 L GAS

2012 Mazda MX-5 Miata Axle Shaft Parts and Q&A

Q: How to properly remove and install an axle shaft on 2012 Mazda MX-5 Miata?
A: Assuming the availability, loosen the rear wheel lug nuts and axle shaft hub locknut. Put the vehicle on jackstands and then take the wheels out. Take out the axle shaft hub locknut and then disconnect the axle shaft with the hub. Record inner CV joint association prior to removal. The opposite is installation where proper torque and lubrication is done.