My Garage
Cart

Genuine Mazda 5 Oil Cooler Hose

Oil Cooler Line
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Oil Cooler Hoses found

  • Mazda 5 Oil Cooler Hose - L3G6-15-260A
    Diagram for Mazda 5 Oil Cooler Hose - L3G6-15-260A
    View related parts

    Mazda 5 Coolant Hose Part Number: L3G6-15-260A

    $25.98 MSRP: $34.63
    You Save: $8.65 (25%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Hose, Bypass; Coolant Hose, Inlet Tube
    • Warranty: This genuine part is guaranteed by Mazda's factory warranty.
    Fits the following Vehicles:
    • 2012-2015, 2008-2010 Mazda 5 | Grand Touring, Sport, Touring | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
  • Mazda 5 Oil Cooler Hose - L309-15-260
    Diagram for Mazda 5 Oil Cooler Hose - L309-15-260
    View related parts

    Mazda 5 Coolant Hose Part Number: L309-15-260

    $26.54 MSRP: $35.40
    You Save: $8.86 (26%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Hose, Bypass; Coolant Hose
    • Replaces: L309-15-261
    • Warranty: This genuine part is guaranteed by Mazda's factory warranty.
    Fits the following Vehicles:
    • 2006-2007 Mazda 5 | Grand Touring, Sport, Touring | 4 Cyl 2.3 L GAS
  • Mazda 5 Oil Cooler Hose - LFB7-15-186C
    Diagram for Mazda 5 Oil Cooler Hose - LFB7-15-186C
    View related parts

    Mazda 5 Upper Hose Part Number: LFB7-15-186C

    $29.19 MSRP: $38.92
    You Save: $9.73 (25%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Hose, Water; Upper Hose
    • Position: Lower
    • Replaces: LFB7-15-186A
    • Warranty: This genuine part is guaranteed by Mazda's factory warranty.
    Fits the following Vehicles:
    • 2006-2010 Mazda 5 | Grand Touring, Sport, Touring | 4 Cyl 2.3 L GAS
  • Mazda 5 Oil Cooler Hose - L5E1-15-18Y
    Diagram for Mazda 5 Oil Cooler Hose - L5E1-15-18Y
    View related parts

    Mazda 5 Lower Hose Part Number: L5E1-15-18Y

    $35.91 MSRP: $47.90
    You Save: $11.99 (26%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Hose, Water
    • Position: Lower
    • Warranty: This genuine part is guaranteed by Mazda's factory warranty.
    Fits the following Vehicles:
    • 2012-2015 Mazda 5 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS

Mazda 5 Oil Cooler Hose

The Mazda 5 Oil Cooler Hose maintains the optimal temperature range of engine lubrication, protecting engine components against overheating and allowing comfortable normal operation. This Oil Cooler Hose fits within the existing Mazda factory dimensions for first, second, and third generation minivans, and consequently the hose fits all 5 models without hassle, with its factory clearance and pressure balance maintained. Its myriad layers of rubber core and heat-resistant outer casing, which can withstand temperatures up to 300 degrees Fahrenheit and pressure of up to 150 psi, are exalted by drivers as evidence of its reliability and efficiency. The hose reduces warm-up times by quickly pumping hot oil into the cooler, which is located in the coolant circuit, and increases fuel efficiency while providing a safety buffer during extended hill climbs or large cargo loads. In case a leak is noticed in the shape of a dark puddle below the front bumper, replacement can restore the cooling system in a few minutes and eliminate the risk of expensive engine wear. Since the line is supplied with the right bends and length, there is no trimming required to install it, and it does not have the kinks that inferior copies may have. Many owners are observed to have combined the authentic component with normal fluid checking, which has enabled their Mazda 5 to clock high mileages without any overheating incidents. The element also enhances transmission life in Mazda auto versions, courtesy of an additional line that seems to be the companion carrying hydraulic fluid, both hoses being made of the identical rugged DNA. This Oil Cooler Hose is unique in the crowded market, with an accurate VIN match and balanced wall thickness that will not burst yet is flexible enough to navigate around tight engine bay passages, making it an ingenious upgrade for every daily-driven 5.

Looking for Oil Cooler Hose with proven quality? Choose OEM Oil Cooler Hose. Mazda designs and builds them to strict factory specs. Every piece goes through rigorous quality checks. You'll get parts that fit right and work like new. Shop our huge inventory of OEM Mazda 5 parts. Enjoy the highly competitive prices online. Our site is your one-stop shop. Each genuine 5 part includes a manufacturer's warranty. Buy with confidence. Our return policy is simple and hassle-free. In a rush? Choose expedited delivery at checkout. You'll love the streamlined experience from search to checkout to receiving your order.

Related Mazda 5 Parts