How to disconnect and remove the center console on Mazda 6?

Disconnect the cable from the negative battery terminal. Using a trim removal tool, carefully pry off the center trim panel from the console. Unscrew the shift knob from the shift lever. With the trim removal tool, carefully pry off the shift indicator panel or boot panel from the console and disconnect any electrical connectors. On 2010 and later models, the center trim panel and center console outer panel are one piece, surrounding the heater control assembly and extending around the shift indicator panel. Ensure all clips are pried up around the perimeter of the panel before attempting to remove it. Adjust the seats to access and remove the two console fasteners from the sides, then slide the seats all the way rearward. For 2009 and later models, pry the rear of the console out and remove the two mounting bolts. Remove the fastener trim caps and the fasteners from the upper forward corners of the console, followed by the screws from the center and front of the console. Open the armrest at the rear of the console, remove the liner and mounting fasteners, then lift up the console and disconnect all electrical connectors. Finally, remove the center console, with installation being the reverse of removal.

Genuine Mazda 6 Center Console

Floor Console Assembly

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Center Consoles found

View related parts
Mazda 6 Console Assembly Part Number: GS3M-64-420K-02
$156.38 MSRP: $208.54
You Save: $52.16 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Console, Rear
- Replaces: GS3M-64-420E-02, GS3M-64-420J-02, GS3M-64-420G-02, GS3M-64-420F-02, GS3M-64-420H-02
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2009-2013 Mazda 6 | i, S | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda 6 Console Assembly Part Number: GS3M-64-420K-30
$191.43 MSRP: $255.28
You Save: $63.85 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Console, Rear
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2009-2013 Mazda 6 | i, S | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda 6 Console Assembly Part Number: GRF5-64-43Y-2A
$524.59 MSRP: $705.24
You Save: $180.65 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boots, Brake; Console Assembly
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2018-2021 Mazda 6 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda 6 Console Assembly Part Number: GRF5-64-43Y-39
$524.59 MSRP: $705.24
You Save: $180.65 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boots, Brake; Console Assembly
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2018-2021 Mazda 6 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda 6 Console Assembly Part Number: GRF5-64-43Y-3A
$524.59 MSRP: $705.24
You Save: $180.65 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boots, Brake; Console Assembly
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2018-2021 Mazda 6 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda 6 Console Assembly Part Number: GRF5-64-43Y-02
$535.04 MSRP: $719.28
You Save: $184.24 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boots, Brake; Console Assembly
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2018-2021 Mazda 6 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda 6 Console Assembly Part Number: GS3W-64-420J-02
Product Specifications
- Other Name: Console, Rear
- Replaces: GS3W-64-420D-02, GS3W-64-420G-02, GS3W-64-420F-02, GS3W-64-420E-02, GS3W-64-420H-02
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2009-2013 Mazda 6 | i, S | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda 6 Console Assembly Part Number: GK2C-64-420M-72
Product Specifications
- Other Name: Console, Rear
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2003-2005 Mazda 6 | i, S | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda 6 Console Assembly Part Number: GK2C64420M80
Product Specifications
- Other Name: Rear Console
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2003-2005 Mazda 6 | i, S | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda 6 Console Assembly Part Number: GP7A-64-420B-02
Product Specifications
- Other Name: Console, Rear; Lid Assembly
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2006-2008 Mazda 6 | i, S | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda 6 Console Assembly Part Number: GP9A-64-420C-02
Product Specifications
- Other Name: Console, Rear
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2006-2007 Mazda 6 | Mazdaspeed | 4 Cyl 2.3 L GAS
View related parts
Mazda 6 Console Assembly Part Number: GP9B-64-420C-02
Product Specifications
- Other Name: Console, Rear
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2006-2007 Mazda 6 | Mazdaspeed | 4 Cyl 2.3 L GAS

Mazda 6 Center Console

The Mazda 6 Center Console provides drivers and passengers with a specific base station where daily necessities are stored and simple access to controls that maintain a clean and comfortable journey. The interior of recent generations has this compartment extending out of the dash to the rear seat, and this transmission tunnel includes bins, cupholders, and a sliding armrest cover in some cases, so coins, phones, or keys will remain safe even when the road turns rough. Previous designs concentrated on placing the gear selector in place, but newer designs are moving the shifter further up the vertical stack, leaving the Center Console free to be doubled as an organizer and a place to rest an elbow. The model has had two major variations throughout its lifetime, the first-run Mazda 6 cars having the plain hinged-lid box with molded cup wells, and the latter, more adaptable design, which includes removable trays, padded lids, and optional cooled compartments and rear passenger vents. The latter is characterized by enhanced hinge strength and a redesigned latch, which minimize wear introduced by everyday opening and closing, making the interior look fresh longer. Regardless of the version, all Mazda cabins use this Center Console to avoid untidiness, secure valuables, and provide fast access to climate or audio controls without taking the eyes off the road. Frequent usage is its advantage, since a broken hinge, a ripped pad, or a lock that is stuck can serve as a quick reminder to drivers of how convenient the Mazda Center Console can be.

Looking for Center Console with proven quality? Choose OEM Center Console. Mazda designs and builds them to strict factory specs. Every piece goes through rigorous quality checks. You'll get parts that fit right and work like new. Shop our huge inventory of OEM Mazda 6 parts. Enjoy the highly competitive prices online. Our site is your one-stop shop. Each genuine 6 part includes a manufacturer's warranty. Buy with confidence. Our return policy is simple and hassle-free. In a rush? Choose expedited delivery at checkout. You'll love the streamlined experience from search to checkout to receiving your order.

Mazda 6 Center Console Parts and Q&A

Console Assembly
GS3M-64-420K-30
Q: How to disconnect and remove the center console on Mazda 6?
A:
Disconnect the cable from the negative battery terminal. Using a trim removal tool, carefully pry off the center trim panel from the console. Unscrew the shift knob from the shift lever. With the trim removal tool, carefully pry off the shift indicator panel or boot panel from the console and disconnect any electrical connectors. On 2010 and later models, the center trim panel and center console outer panel are one piece, surrounding the heater control assembly and extending around the shift indicator panel. Ensure all clips are pried up around the perimeter of the panel before attempting to remove it. Adjust the seats to access and remove the two console fasteners from the sides, then slide the seats all the way rearward. For 2009 and later models, pry the rear of the console out and remove the two mounting bolts. Remove the fastener trim caps and the fasteners from the upper forward corners of the console, followed by the screws from the center and front of the console. Open the armrest at the rear of the console, remove the liner and mounting fasteners, then lift up the console and disconnect all electrical connectors. Finally, remove the center console, with installation being the reverse of removal.