How to handle the Crankshaft Seal and Flywheel during engine removal and installation with a transaxle on Mazda 626?

To remove the engine, first remove a flywheel or torque converter cover then in the case of an automatic transaxle remove the torque converter retaining bolts. The second step is to remove the screws that hold the bell housing to disassemble the transaxle and the engine. In the case of automatic systems, take out the transaxle driveplate, whereas in the case of manual systems, take out the pressure plate, clutch disc, and flywheel. Pry out the oil seal with a screwdriver. To install, place the new seal firmly in place and gently tap all around the outer edge until it is firmly in place. Then, install the flywheel and the flywheel plate or the driveplane assembly, connect the engine with the transaxle and then install the flywheel or torque converter cover, after which the engine is to be re-fitted back into the vehicle.

Genuine Mazda 626 Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Crankshaft Seals found

View related parts
Mazda 626 Rear Main Seal Part Number: FS01-11-399
$36.30 MSRP: $48.41
You Save: $12.11 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Oil
- Position: Rear
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1993-2002 Mazda 626 | DX, ES, LX | 4 Cyl 2.0 L GAS
View related parts
Mazda 626 Rear Main Seal Part Number: F802-11-399
$26.61 MSRP: $35.49
You Save: $8.88 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Oil Crankshaft
- Position: Rear
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1984-1991 Mazda 626 | DX, GT, LE, LX, Turbo, Turbo 4WS | 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS
View related parts
Mazda 626 Rear Main Seal Part Number: F285-11-399A
Product Specifications
- Other Name: Seal, Oil Crankshaft
- Position: Rear
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1992 Mazda 626 | DX, LX | 4 Cyl 2.2 L GAS
View related parts
Mazda 626 Rear Main Seal Part Number: KL01-11-312
Product Specifications
- Other Name: Seal, Oil Crankshaft
- Position: Rear
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1993-2002 Mazda 626 | ES, LX | 6 Cyl 2.5 L GAS

Mazda 626 Crankshaft Seal

Looking for Crankshaft Seal with proven quality? Choose OEM Crankshaft Seal. Mazda designs and builds them to strict factory specs. Every piece goes through rigorous quality checks. You'll get parts that fit right and work like new. Shop our huge inventory of OEM Mazda 626 parts. Enjoy the highly competitive prices online. Our site is your one-stop shop. Each genuine 626 part includes a manufacturer's warranty. Buy with confidence. Our return policy is simple and hassle-free. In a rush? Choose expedited delivery at checkout. You'll love the streamlined experience from search to checkout to receiving your order.

Mazda 626 Crankshaft Seal Parts and Q&A

Rear Main Seal
F285-11-399A
Q: How to handle the Crankshaft Seal and Flywheel during engine removal and installation with a transaxle on Mazda 626?
A:
To remove the engine, first remove a flywheel or torque converter cover then in the case of an automatic transaxle remove the torque converter retaining bolts. The second step is to remove the screws that hold the bell housing to disassemble the transaxle and the engine. In the case of automatic systems, take out the transaxle driveplate, whereas in the case of manual systems, take out the pressure plate, clutch disc, and flywheel. Pry out the oil seal with a screwdriver. To install, place the new seal firmly in place and gently tap all around the outer edge until it is firmly in place. Then, install the flywheel and the flywheel plate or the driveplane assembly, connect the engine with the transaxle and then install the flywheel or torque converter cover, after which the engine is to be re-fitted back into the vehicle.