How to remove the instrument cluster after disconnecting the battery negative cable on Mazda 626?

The instrument panel cluster can be removed by disconnecting the negative battery cable and then removing the cluster. In the case of an analog instrument cluster, simply remove the front lens, printed circuit, and plate, remove the retaining bolts, and then remove the instruments out of the cluster, and installation is the opposite. In the case of an electronic instrument panel, the bulbs, sockets and retaining screws are removed in order to extract the printed circuit boards in the meter case. Then pull off the retaining screws, and the front lens plate, and then the tachometer and the printed circuit assembly, and the display switch assembly, and the illumination control and knob assembly. Lastly, also take off the retaining screws and unplug the speedometer, the fuel and temperature meters off the case, which will be reinstalled in the same direction as it was removed.

Genuine Mazda 626 Instrument Cluster

Speedometer Instrument Cluster

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Instrument Clusters found

View related parts
Mazda 626 Fuel Gauge Part Number: GN51-55-481
$80.16 MSRP: $106.90
You Save: $26.74 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Meter, Fuel
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1990-1992 Mazda 626 | DX, GT, LX | 4 Cyl 2.2 L GAS
View related parts
Mazda 626 Temperature Gauge Part Number: GJ21-55-491B
$82.81 MSRP: $110.44
You Save: $27.63 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Meter, Thermostat; Temperature Gauge
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1988-1989 Mazda 626 | DX, LX, Turbo, Turbo 4WS | 4 Cyl 2.2 L GAS
View related parts
Mazda 626 Speedometer Head Part Number: GA2B-55-471
$60.76 MSRP: $79.75
You Save: $18.99 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Speedometer
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1993-1997 Mazda 626 | DX, ES, LX | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mazda 626 Temperature Gauge Part Number: GA2B-55-481
$33.73 MSRP: $44.28
You Save: $10.55 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Meter, Combination; Temperature Gauge
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1993-1997 Mazda 626 | DX, ES, LX | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mazda 626 Temperature Gauge Part Number: GA2F-55-481
Product Specifications
- Other Name: Meter, Combination; Temperature Gauge
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1996-1997 Mazda 626 | DX, ES, LX | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mazda 626 Fuel Gauge Part Number: GC2B55481
Product Specifications
- Other Name: Meter Combination
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1995 Mazda 626 | DX, ES, LX | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mazda 626 Circuit Board Part Number: GG2A-55-442
Product Specifications
- Other Name: Plate, Print
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1998-2002 Mazda 626 | DX, ES, LX | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mazda 626 Gauge Cluster Part Number: GG2A-55-476
Product Specifications
- Other Name: Unit, Display-Meter Set; Gauge Cluster
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2000-2001 Mazda 626 | ES, LX | 4 Cyl 2.0 L GAS
View related parts
Mazda 626 Speedometer Head Part Number: GJ21-55-471
Product Specifications
- Other Name: Speedometer
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1984-1992 Mazda 626 | DX, LX | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS
View related parts
Mazda 626 Fuel Gauge Part Number: GJ21-55-481A
Product Specifications
- Other Name: Meter, Fuel
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1988-1989 Mazda 626 | DX, LX, Turbo, Turbo 4WS | 4 Cyl 2.2 L GAS
View related parts
Mazda 626 Instrument Panel Part Number: GJ25-64-270B-19
Product Specifications
- Other Name: Panel, Center Lower
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1988-1992 Mazda 626 | DX, GT, LE, LX, Turbo, Turbo 4WS | 4 Cyl 2.2 L GAS

Mazda 626 Instrument Cluster

Looking for Instrument Cluster with proven quality? Choose OEM Instrument Cluster. Mazda designs and builds them to strict factory specs. Every piece goes through rigorous quality checks. You'll get parts that fit right and work like new. Shop our huge inventory of OEM Mazda 626 parts. Enjoy the highly competitive prices online. Our site is your one-stop shop. Each genuine 626 part includes a manufacturer's warranty. Buy with confidence. Our return policy is simple and hassle-free. In a rush? Choose expedited delivery at checkout. You'll love the streamlined experience from search to checkout to receiving your order.

Mazda 626 Instrument Cluster Parts and Q&A

Speedometer Head
GJ21-55-471
Q: How to remove the instrument cluster after disconnecting the battery negative cable on Mazda 626?
A:
The instrument panel cluster can be removed by disconnecting the negative battery cable and then removing the cluster. In the case of an analog instrument cluster, simply remove the front lens, printed circuit, and plate, remove the retaining bolts, and then remove the instruments out of the cluster, and installation is the opposite. In the case of an electronic instrument panel, the bulbs, sockets and retaining screws are removed in order to extract the printed circuit boards in the meter case. Then pull off the retaining screws, and the front lens plate, and then the tachometer and the printed circuit assembly, and the display switch assembly, and the illumination control and knob assembly. Lastly, also take off the retaining screws and unplug the speedometer, the fuel and temperature meters off the case, which will be reinstalled in the same direction as it was removed.