How to remove the Wiper Blade and disconnect the battery negative cable on Mazda 626?

Unscrew the negative cable of the battery, then unscrew the wiper and arm assembly as well as the rubber seal. Unlock the back hatch and remove the trim panel. Then, take out the retaining bolts, bracket and wiper motor. To install, just follow the reversal of the pull-out process with the correct arm height adjustment of the wiper.

How often should the wiper blade assembly be inspected for damage and maintenance on Mazda 626?

Windshield and rear window wiper and blade assembly ought to be periodically inspected against damage, lost parts and broken and worn blade components. The wiper blades may accumulate road film on them which may interfere with its efficiency hence they must be washed with a light solution of detergent often. When inspecting the wiper blades, the wiping mechanism can also loosen bolts, nuts, and fasteners and check them and tighten them where needed. In case the elements of the wiper blades are broken, torn, or distorted, they must be changed to new ones. In order to change the blade, position the arm assembly so it is clear of the glass and unscrew the blade by lifting the release lever. Take a needle nose pair of pliers and pull out the retaining clip followed by the blade element. Insert the new blade element and fix the retaining clip. Lift the release lever and slide the blade element pin into place until it clips into place. Lastly, wiper arm nut: narrow down to check whether it is tightened or not.

Genuine Mazda 626 Wiper Blade

Windshield Wiper Blade

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Wiper Blades found

View related parts
Mazda 626 Blade Part Number: TA02-67-330A-9U
$17.33 MSRP: $23.11
You Save: $5.78 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade Right, Wiper Front; Blade
- Position: Right
- Replaces: TA02-67-330A
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1993-1997 Mazda 626 | DX, ES, LX | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mazda 626 Blade Part Number: BJ0E-67-330-9U
$19.79 MSRP: $26.39
You Save: $6.60 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade Left, Wiper Front; Blade Assembly, Front Blade
- Replaces: B32H-67-330, GA2K-67-330B, BJ0E-67-330
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1988-1997 Mazda 626 | DX, ES, GT, LE, LX, Turbo, Turbo 4WS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mazda 626 Insert Part Number: DB09-67-333-9U
$10.58 MSRP: $14.10
You Save: $3.52 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber, Blade Front; Blade Refill
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1993-1994 Mazda 626 | DX, ES, LX | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mazda 626 Blade Part Number: FB02-67-330
Product Specifications
- Other Name: Blade Right, Wiper Front
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1988-1991 Mazda 626 | DX, GT, LE, LX, Turbo, Turbo 4WS | 4 Cyl 2.2 L GAS
View related parts
Mazda 626 Blade Part Number: G030-67-330A
Product Specifications
- Other Name: Blade, Wiper-Front (Right)
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1985 Mazda 626 | DX, LX | 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
Mazda 626 Wiper Blade Part Number: GD7A-67-330A
Product Specifications
- Other Name: Blade Left, Wiper Front
- Position: Left
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1998-2002 Mazda 626 | DX, ES, LX | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mazda 626 Wiper Blade Refill Part Number: GD7A-67-331A
Product Specifications
- Other Name: Rubber, Front Blade
- Position: Left
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1998-2002 Mazda 626 | DX, ES, LX | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mazda 626 Wiper Blade Part Number: GD7B-67-330
Product Specifications
- Other Name: Blade(Right), Wiper-Front
- Position: Right
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1998-2002 Mazda 626 | DX, ES, LX | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mazda 626 Wiper Blade Refill Part Number: GD7B-67-331
Product Specifications
- Other Name: Rubber, Blade-Front
- Position: Right
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1998-2002 Mazda 626 | DX, ES, LX | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS

Mazda 626 Wiper Blade

Looking for Wiper Blade with proven quality? Choose OEM Wiper Blade. Mazda designs and builds them to strict factory specs. Every piece goes through rigorous quality checks. You'll get parts that fit right and work like new. Shop our huge inventory of OEM Mazda 626 parts. Enjoy the highly competitive prices online. Our site is your one-stop shop. Each genuine 626 part includes a manufacturer's warranty. Buy with confidence. Our return policy is simple and hassle-free. In a rush? Choose expedited delivery at checkout. You'll love the streamlined experience from search to checkout to receiving your order.

Mazda 626 Wiper Blade Parts and Q&A

Blade
FB02-67-330
Q: How to remove the Wiper Blade and disconnect the battery negative cable on Mazda 626?
A:
Unscrew the negative cable of the battery, then unscrew the wiper and arm assembly as well as the rubber seal. Unlock the back hatch and remove the trim panel. Then, take out the retaining bolts, bracket and wiper motor. To install, just follow the reversal of the pull-out process with the correct arm height adjustment of the wiper.
Blade
BJ0E-67-330-9U
Q: How often should the wiper blade assembly be inspected for damage and maintenance on Mazda 626?
A:
Windshield and rear window wiper and blade assembly ought to be periodically inspected against damage, lost parts and broken and worn blade components. The wiper blades may accumulate road film on them which may interfere with its efficiency hence they must be washed with a light solution of detergent often. When inspecting the wiper blades, the wiping mechanism can also loosen bolts, nuts, and fasteners and check them and tighten them where needed. In case the elements of the wiper blades are broken, torn, or distorted, they must be changed to new ones. In order to change the blade, position the arm assembly so it is clear of the glass and unscrew the blade by lifting the release lever. Take a needle nose pair of pliers and pull out the retaining clip followed by the blade element. Insert the new blade element and fix the retaining clip. Lift the release lever and slide the blade element pin into place until it clips into place. Lastly, wiper arm nut: narrow down to check whether it is tightened or not.