×
- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Mazda Parts
My Garage
My Account
Cart
Genuine Mazda B2200 Hood
Engine Hood- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Hood found
Mazda B2200 Hood Part Number: UB82-52-310
Mazda B2200 Hood
The Mazda B2200 Hood is designed to keep the engine compartment dry in bad weather and protected from road debris, but it provides easy access to the engine compartment during maintenance. The Hood panel is attached to the cowl on each pickup in the B2200 line and at the grille area using latches to enable drivers to easily lift the Hood and close it firmly to prevent moisture and flying stones from getting into crucial locations. The brand over the years provided two basic options of construction, the old stamped steel and the lighter weight aluminum, which were constructed to crumple in an impact to absorb the impact energy and retain the classic Mazda look. Steel models provide reliable durability and are ding resistant compared to aluminum models, which are trimmed down to save weight, promote fuel efficiency, and minimize front end rust. Whether ordered as an original equipment component manufactured by Mazda manufactured to factory specifications, the Hoods are all made to the specific proportions of the small truck and therefore there should be no problem with the fit, and the styling is sharp. The prices are generally moderate, reflecting the material selection, and purchases, either as a unit or as a package, and the warranty varies according to the supplier but can provide substantial consumer safety. The fact that the panel is readily available thus makes it easy to replace should the owner need to do so, which means that a good owner can easily bring back the clean and cohesive look that characterizes a well-maintained Mazda.
Looking for Hood with proven quality? Choose OEM Hood. Mazda designs and builds them to strict factory specs. Every piece goes through rigorous quality checks. You'll get parts that fit right and work like new. Shop our huge inventory of OEM Mazda B2200 parts. Enjoy the highly competitive prices online. Our site is your one-stop shop. Each genuine B2200 part includes a manufacturer's warranty. Buy with confidence. Our return policy is simple and hassle-free. In a rush? Choose expedited delivery at checkout. You'll love the streamlined experience from search to checkout to receiving your order.
Mazda B2200 Hood Parts and Q&A
- Q: How can the alignment of self-supporting hoods be adjusted on Mazda B2200?A:To ensure a match between self supporting hoods changes can be done front to rear or side to side by loosening the bolts between the hood and the hinge or the hinge and the body. The height of the front edge can be altered by placing or removing shims underneath the hinges and the height of the rear can be altered by raising or lowering the rear hood bumpers. When using hoods that are supported by a prop, the process of alignment includes reducing the lock plate bolts and slanting the lock plate either vertically or horizontally. In the case of the Navajo model, one should open the hood and trace the position of the hinge and latch. Weaken the hinge-to-hood bolts by a little, so that they can swing, and then make the hood fit in place with the adjoining body parts and when good fit is achieved, tighten the bolts. To vary the height of the hood, loosen the bolts that are connecting the hinge on the body and raise or lower it accordingly. The second step is to loosen the latch bolts and slide the latch left to right to get the striker into alignment with the latch. The latch bolts should then be tightened. Lastly, grease the latch and the hinges, and ensure the hood fits several times.
