×
- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Mazda Parts
My Garage
My Account
Cart
Genuine Mazda B2200 Windshield Wiper Motors
Wiper Motor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Windshield Wiper Motors found
Mazda B2200 Motor Part Number: UB39-67-345B
Mazda B2200 Windshield Wiper Motors
Looking for Windshield Wiper Motors with proven quality? Choose OEM Windshield Wiper Motors. Mazda designs and builds them to strict factory specs. Every piece goes through rigorous quality checks. You'll get parts that fit right and work like new. Shop our huge inventory of OEM Mazda B2200 parts. Enjoy the highly competitive prices online. Our site is your one-stop shop. Each genuine B2200 part includes a manufacturer's warranty. Buy with confidence. Our return policy is simple and hassle-free. In a rush? Choose expedited delivery at checkout. You'll love the streamlined experience from search to checkout to receiving your order.
Mazda B2200 Windshield Wiper Motors Parts and Q&A
- Q: How to remove and install Windshield Wiper Motors on Mazda B2200?A:The wiper components are removed and installed in the same order; begin by removing the wiper arm/blade assembly and make sure not to mix the various arms. Then take off the rubber seal along the front of the cowl, screw up the cowl and strip away the access hole covers. Loosen the bolts attaching the motor drive screws of the wiper shaft, mark the location of the wiper crank arm with a mark relative to the wiper motor and unassemble the wiper connection. Removal of the wiper motor with disconnection of the wiring harness after removing the wiper linkage, unbolt, and remove the wiper motor. To install, reverse the steps of taking out, and make sure that the height of the wiper arm is 0.787 inch (20mm) when parked, and secure the arm retaining nuts, 8-10 ft. lbs. (11-14Nm). To reach the front of the MPV, take off the wiper arms, drive link nuts, disconnect the battery ground cable and pull out the motor and linkage assembly. Assuming that you can, leave the motor arm attached to retain the automatic park position. To disassemble the rear, unscrew battery ground cable, pull off protective cap and wiper arm nut then remove wiper arm, seal and bushing. Take out the inner trim panels and the weathershield, disassemble the wiper motor wiring and remove the motor by removing the mounting bolts. To start-up the Navajo, the front wiper switch and ignition should be turned on to set the blades and the negative battery cable and the right wiper arm should be removed. Take out the right pivot nut, the linkage access cover and unsnapping the wiper motor clip disconnects the linkage. Unhook the motor wiring, disassemble the motor and to install, fix the motor using screws, hook the wiring and make sure that the connection is secure. Install back the wiper pivot shaft and nut on right and reconnect the battery and ensure the system has started working again. To take the rear of off, unscrew the negative battery cable, de-fit the wipers arm and blade, pull up the interiors trim, unscrew the motor bolts, and the electrical connections then replace the motor and reassemble.
