In order to take out the radiator grille, you have to remove the single screw at the center of the radiator. Then, use a small flat blade screwdriver to open the tabs of the three radiator fasteners and remove the grille. In the installation process, hold the grid in position and make sure the fastener holes correspond with the holes in the body. When they do, push the fasteners into their position and replace the centre screw. For model 626 and MX-6 use the tip of a small flat bladed screwdriver to prise open the tabs of the fasteners and remove the grille, noting that the number of fasteners may vary from model year to model year. To install once again, replace the grille and align the fastener holes with the body holes and press the fasteners into the body.