How to maintain Wheel Bearing and Wheel Hub on 1985 Mazda GLC?

The steps that follow are applicable in FWD cars only. There are special tools needed in 1981-85 GLC (except Wagon). Start with taking off the disc brake rotor, and then take out the inner race of the outer bearing. Check the knuckle area, change dust cover which may require, and check the seals. Install the knuckle and hub, in accordance with torque.

Genuine 1985 Mazda GLC Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wheel Bearings found

View related parts
1985 Mazda GLC Wheel Bearing Part Number: B001-33-047-MV
Product Specifications
- Other Name: Taper Bearing
- Position: Front
- Item Weight: 2.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: B001-33-047-MV
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 1985 Mazda GLC Submodels:
- Base, DX, LX | 4 Cyl 1.5 L GAS
View related parts
1985 Mazda GLC Wheel Bearing Part Number: B002-33-047
Product Specifications
- Other Name: Bearing, Inner; Wheel Bearing
- Position: Rear
- Item Weight: 2.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: B002-33-047
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 1985 Mazda GLC Submodels:
- Base, DX, LX | 4 Cyl 1.5 L GAS
View related parts
1985 Mazda GLC Rear Wheel Bearing Part Number: B002-33-075
Product Specifications
- Other Name: Bearing, Outer
- Position: Rear
- Item Weight: 2.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: B002-33-075
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 1985 Mazda GLC Submodels:
- Base, DX, LX | 4 Cyl 1.5 L GAS

1985 Mazda GLC Wheel Bearing Parts and Q&A

Q: How to maintain Wheel Bearing and Wheel Hub on 1985 Mazda GLC?
A: The steps that follow are applicable in FWD cars only. There are special tools needed in 1981-85 GLC (except Wagon). Start with taking off the disc brake rotor, and then take out the inner race of the outer bearing. Check the knuckle area, change dust cover which may require, and check the seals. Install the knuckle and hub, in accordance with torque.