How can the Brake Master Cylinder be serviced, and what steps should be taken to ensure proper installation and operation on 1988 Mazda RX-7?

Replace or overhaul the master cylinder. Located in the engine compartment at the front of the power brake assist unit, protect painted surfaces, disconnect the fluid-level sensor coupler, use rags, disconnect and plug fluid pipes, remove fasteners and the cylinder, reinstall, refill, bleed, and road-test for leaks.

Genuine 1988 Mazda RX-7 Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Master Cylinders found

View related parts
1988 Mazda RX-7 Master Cylinder Part Number: FB02-43-400R-0D
Product Specifications
- Other Name: Reman, Without Abs / Aas; Master Cylinder Assembly
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: FB02-43-400R-0D
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 1988 Mazda RX-7 Submodels:
- 10th Anniversary, Base, Base 2+2, Convertible, GTU, GTUs, GXL, GXL 2+2, LX, LX 2+2, SE, SE 2+2, Sport, Turbo | 2 Cyl 1.3 L GAS
View related parts
1988 Mazda RX-7 Master Cylinder Part Number: FB08-43-400R-0C
Product Specifications
- Other Name: Reman, Without Abs & With A.A. Suspension
- Item Weight: 2.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: FB08-43-400R-0C
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 1988 Mazda RX-7 Submodels:
- 10th Anniversary, Base, Base 2+2, Convertible, GTU, GXL, GXL 2+2, LX, LX 2+2, SE, SE 2+2, Sport, Turbo | 2 Cyl 1.3 L GAS

1988 Mazda RX-7 Brake Master Cylinder Parts and Q&A

Q: How can the Brake Master Cylinder be serviced, and what steps should be taken to ensure proper installation and operation on 1988 Mazda RX-7?
A: Replace or overhaul the master cylinder. Located in the engine compartment at the front of the power brake assist unit, protect painted surfaces, disconnect the fluid-level sensor coupler, use rags, disconnect and plug fluid pipes, remove fasteners and the cylinder, reinstall, refill, bleed, and road-test for leaks.