How to replace the Brake Pad Set on 1988 Mazda RX-7?

Raise and support the front end, remove the wheel. Remove locking clips and stopper plates; use a hammer if needed. Suspend caliper by wire, remove anti-rattle spring and pads. Replace pads with matching ones, grease contact areas, compress piston, reinstall plates and clips, bleed brakes, reinstall wheels, lower and test.

Genuine 1988 Mazda RX-7 Brake Pad Set

Disc Brake Pad Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Pad Sets found

View related parts
1988 Mazda RX-7 Pads Part Number: FB71-33-28ZD
$162.83 MSRP: $217.14
You Save: $54.31 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Set, Front Caliper; Pads
- Replaces: FC02-33-28ZA, FC02-33-28Z
- Item Weight: 4.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: FB71-33-28ZD
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 1988 Mazda RX-7 Submodels:
- 10th Anniversary, Base, Base 2+2, Convertible, GTU, GTUs, GXL, GXL 2+2, LX, LX 2+2, SE, SE 2+2, Sport, Turbo | 2 Cyl 1.3 L GAS
View related parts
1988 Mazda RX-7 Pads Part Number: FA66-49-280
Product Specifications
- Other Name: Pad Set, Front Caliper; Pads
- Item Weight: 4.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: FA66-49-280
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 1988 Mazda RX-7 Submodels:
- 10th Anniversary, Base, Base 2+2, Convertible, GSL-SE, GTU, GTUs, GXL, GXL 2+2, LX, LX 2+2, SE, SE 2+2, Sport, Turbo | 2 Cyl 1.3 L GAS

1988 Mazda RX-7 Brake Pad Set Parts and Q&A

Q: How to replace the Brake Pad Set on 1988 Mazda RX-7?
A: Raise and support the front end, remove the wheel. Remove locking clips and stopper plates; use a hammer if needed. Suspend caliper by wire, remove anti-rattle spring and pads. Replace pads with matching ones, grease contact areas, compress piston, reinstall plates and clips, bleed brakes, reinstall wheels, lower and test.