How to properly remove and install a tie rod end on 1989 Mazda 929?

Measure length of tie rod when there is no alignment tool. Take out cotter pin, nut and loosen locknut with tie rod still held. Removal and replacement or re-installation is possible using a puller. Torque castellated nuts to 22-33 ft-lbs and locknuts to 5158 ft-lbs and make sure it is aligned or original length.

Genuine 1989 Mazda 929 Tie Rod End

Steering Rod End

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Tie Rod Ends found

View related parts
1989 Mazda 929 Tie Rod End Part Number: 8AH1-32-280
$48.60 MSRP: $64.81
You Save: $16.21 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ball Joint Set; Tie Rod End
- Position: Outer
- Item Weight: 1.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8AH1-32-280
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 1989 Mazda 929 Submodels:
- Base, S | 6 Cyl 3.0 L GAS
View related parts
1989 Mazda 929 Inner Tie Rod Part Number: H260-32-240A
$94.36 MSRP: $125.84
You Save: $31.48 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ball Joint Set
- Position: Right
- Item Weight: 1.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: H260-32-240A
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 1989 Mazda 929 Submodels:
- Base | 6 Cyl 3.0 L GAS
View related parts
1989 Mazda 929 Inner Tie Rod Part Number: H261-32-240A
$92.49 MSRP: $123.35
You Save: $30.86 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ball Joint Set
- Position: Left
- Item Weight: 1.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: H261-32-240A
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 1989 Mazda 929 Submodels:
- Base | 6 Cyl 3.0 L GAS

1989 Mazda 929 Tie Rod End Parts and Q&A

Q: How to properly remove and install a tie rod end on 1989 Mazda 929?
A: Measure length of tie rod when there is no alignment tool. Take out cotter pin, nut and loosen locknut with tie rod still held. Removal and replacement or re-installation is possible using a puller. Torque castellated nuts to 22-33 ft-lbs and locknuts to 5158 ft-lbs and make sure it is aligned or original length.