How to properly remove and install a tie rod end on 1990 Mazda 323?

Loose lug nuts, position and support front wheels on jackstands, block rear, engage parking brake, take off front wheel. Take out cotter pin, loosen castle nut, mark tie-rod end, disconnect tie-rod end using a puller and unscrew tie-rod end using a puller. Remark, screw in nuts, install cotter pin, lower and adjust alignment.

Genuine 1990 Mazda 323 Tie Rod End

Steering Rod End

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Tie Rod Ends found

View related parts
1990 Mazda 323 Outer Tie Rod Part Number: 8AB2-32-280
$97.81 MSRP: $130.44
You Save: $32.63 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ball Joint Set
- Position: Outer
- Replaced by: B455-32-280
- Item Weight: 1.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8AB2-32-280
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 1990 Mazda 323 Submodels:
- Base, SE | 4 Cyl 1.6 L GAS
View related parts
1990 Mazda 323 Inner Tie Rod Part Number: B4553224X
Product Specifications
- Other Name: Ball Joint Set
- Position: Inner
- Item Weight: 1.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: B4553224X
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 1990 Mazda 323 Submodels:
- Base, SE | 4 Cyl 1.6 L GAS
View related parts
1990 Mazda 323 Inner Tie Rod Part Number: B456-32-24X
Product Specifications
- Other Name: Ball Joint Set
- Position: Right
- Item Weight: 1.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: B456-32-24X
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 1990 Mazda 323 Submodels:
- Base, SE | 4 Cyl 1.6 L GAS
View related parts
1990 Mazda 323 Inner Tie Rod Part Number: B456-32-25X
Product Specifications
- Other Name: Ball Joint Set
- Position: Left
- Item Weight: 1.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: B456-32-25X
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 1990 Mazda 323 Submodels:
- Base, SE | 4 Cyl 1.6 L GAS

1990 Mazda 323 Tie Rod End Parts and Q&A

Q: How to properly remove and install a tie rod end on 1990 Mazda 323?
A: Loose lug nuts, position and support front wheels on jackstands, block rear, engage parking brake, take off front wheel. Take out cotter pin, loosen castle nut, mark tie-rod end, disconnect tie-rod end using a puller and unscrew tie-rod end using a puller. Remark, screw in nuts, install cotter pin, lower and adjust alignment.