How to remove and install the rear Windshield Washer Switch on 1990 Mazda B2200?

On Navajo models, disconnect battery, remove ashtray, cluster finish panel and mounting bezel, disconnect the switch lead and push out the switch; reinstall wiring and panels, secure screws, reconnect battery and check. On MPV models, disconnect battery, remove trim and cluster hood to unplug connectors, replace the switch and reinstall.

Genuine 1990 Mazda B2200 Windshield Washer Switch

Wiper Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Windshield Washer Switchs found

View related parts
1990 Mazda B2200 Turn Signal Switch Part Number: UB71-66-120
$251.50 MSRP: $335.40
You Save: $83.90 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Combination; Headlamp Switch, Lock Housing, Wiper Switch
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: UB71-66-120
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 1990 Mazda B2200 Submodels:
- Base, LE-5, SE-5 | 4 Cyl 2.2 L GAS
View related parts
1990 Mazda B2200 Turn Signal Switch Part Number: UB72-66-120
$305.76 MSRP: $407.76
You Save: $102.00 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Combination; Headlamp Switch, Turn Signal Switch, Wiper Switch
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: UB72-66-120
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 1990 Mazda B2200 Submodels:
- Base, LE-5, LX, SE-5 | 4 Cyl 2.2 L GAS

1990 Mazda B2200 Windshield Washer Switch Parts and Q&A

Q: How to remove and install the rear Windshield Washer Switch on 1990 Mazda B2200?
A: On Navajo models, disconnect battery, remove ashtray, cluster finish panel and mounting bezel, disconnect the switch lead and push out the switch; reinstall wiring and panels, secure screws, reconnect battery and check. On MPV models, disconnect battery, remove trim and cluster hood to unplug connectors, replace the switch and reinstall.