How to remove and install an Ignition Coil on 1990 Mazda MX-6?

Prior to inspection, clean the piston / connecting rod assemblies, removing original piston rings, replacing them with new ones. Wipe Pistons and ring grooves carefully and without damaging. Look for cracks and wear, oil return holes. Check clearances; reboring and new parts may be needed due to excessive wear. Test connecting rods.

Genuine 1990 Mazda MX-6 Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Ignition Coils found

View related parts
1990 Mazda MX-6 Pick-Up Coil Part Number: F201-18-V15
$65.51 MSRP: $87.37
You Save: $21.86 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pickup Set
- Item Weight: 0.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F201-18-V15
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 1990 Mazda MX-6 Submodels:
- DX, LE, LX | 4 Cyl 2.2 L GAS
View related parts
1990 Mazda MX-6 Ignition Coil Part Number: F286-18-10XA
Product Specifications
- Other Name: Coil, Ignition
- Item Weight: 1.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F286-18-10XA
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 1990 Mazda MX-6 Submodels:
- DX, GT, GT 4WS, LE, LX | 4 Cyl 2.2 L GAS
View related parts
1990 Mazda MX-6 Ignition Coil Part Number: JF01-18-100B
Product Specifications
- Other Name: Coil, Ignition
- Item Weight: 1.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: JF01-18-100B
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 1990 Mazda MX-6 Submodels:
- DX, GT, GT 4WS, LE, LX | 4 Cyl 2.2 L GAS

1990 Mazda MX-6 Ignition Coil Parts and Q&A

Q: How to remove and install an Ignition Coil on 1990 Mazda MX-6?
A: Prior to inspection, clean the piston / connecting rod assemblies, removing original piston rings, replacing them with new ones. Wipe Pistons and ring grooves carefully and without damaging. Look for cracks and wear, oil return holes. Check clearances; reboring and new parts may be needed due to excessive wear. Test connecting rods.