How to properly replace a CV Joint Boot on 1991 Mazda 626?

Obtain boot kit with moly lubricant. Remove driveaxle, secure in vise; cut bands, slide boot down. Remove outer ring, snap ring and bearing; clean and inspect splines. Tape, lubricate and fit new CV joint boot, reinstall bearing and snap ring, pack grease, seat and secure bands, then install driveaxle.

Genuine 1991 Mazda 626 CV Joint Boot

Constant-Velocity Joint Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 CV Joint Boots found

View related parts
1991 Mazda 626 Boots Part Number: G043-22-540A
Product Specifications
- Other Name: Boot Set, Inner Joint; Boot, Boot Kit, Inner Boot
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: G043-22-540A
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 1991 Mazda 626 Submodels:
- DX, GT, LE, LX | 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS
View related parts
1991 Mazda 626 Boots Part Number: G05322540
Product Specifications
- Other Name: Boot Set, Inner Joint; Boot
- Position: Inner
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: G05322540
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 1991 Mazda 626 Submodels:
- GT, Turbo, Turbo 4WS | 4 Cyl 2.2 L GAS
View related parts
1991 Mazda 626 Boots Part Number: GS50-V9-050-9U
Product Specifications
- Other Name: Boot, Outer Joint; Boot, Boot Kit, Outer Boot
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: GS50-V9-050-9U
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 1991 Mazda 626 Submodels:
- DX, GT, LE, LX | 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS
View related parts
1991 Mazda 626 Boots Part Number: GS70-V9-050-9U
Product Specifications
- Other Name: Boot, Outer Joint; Boot
- Position: Outer
- Item Weight: 1.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: GS70-V9-050-9U
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 1991 Mazda 626 Submodels:
- ES, GT, LX | 4 Cyl 2.2 L GAS, 6 Cyl 2.5 L GAS

1991 Mazda 626 CV Joint Boot Parts and Q&A

Q: How to properly replace a CV Joint Boot on 1991 Mazda 626?
A: Obtain boot kit with moly lubricant. Remove driveaxle, secure in vise; cut bands, slide boot down. Remove outer ring, snap ring and bearing; clean and inspect splines. Tape, lubricate and fit new CV joint boot, reinstall bearing and snap ring, pack grease, seat and secure bands, then install driveaxle.