How to remove and install a distributor on 1991 Mazda 626?

In order to eliminate the distributor, disconnect battery negative cable and coil wire. Take out the retaining screws and cap and turn the engine until the rotor is standing upright. Mark position of the distributor, loosen hoses and remove it. To install, lubricate the O-ring, match marks and reattach hoses. When the crankshaft was rotated, examine compression before aligning timing mark.

Genuine 1991 Mazda 626 Distributor

Ignition Distributor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Distributor found

View related parts
1991 Mazda 626 Distributor Part Number: F285-18-200R-00
Product Specifications
- Other Name: Reman, Distributor Assembly; Distributor
- Item Weight: 4.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F285-18-200R-00
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 1991 Mazda 626 Submodels:
- DX, GT, LE, LX | 4 Cyl 2.2 L GAS

1991 Mazda 626 Distributor Parts and Q&A

Q: How to remove and install a distributor on 1991 Mazda 626?
A: In order to eliminate the distributor, disconnect battery negative cable and coil wire. Take out the retaining screws and cap and turn the engine until the rotor is standing upright. Mark position of the distributor, loosen hoses and remove it. To install, lubricate the O-ring, match marks and reattach hoses. When the crankshaft was rotated, examine compression before aligning timing mark.