How to remove and install the sway bar on 1991 Mazda MX-6?

Raise vehicle on jackstands; remove front wheels, shields. Remove stabilizer bolts and rear bar. For front bar, remove rack-and-pinion bolts, pry assembly and feed bar out left well. Inspect and replace bushings; position bar with left mark; install left bushing aligned, notch rearward; torque bracket bolts, tighten end bolts/nuts.

Genuine 1991 Mazda MX-6 Sway Bar

Sway Bar Kit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Sway Bars found

View related parts
1991 Mazda MX-6 Stabilizer Bar Part Number: G211-34-151B
Product Specifications
- Other Name: Stabilizer, Front
- Item Weight: 8.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: G211-34-151B
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 1991 Mazda MX-6 Submodels:
- DX, GT, GT 4WS, LE, LX | 4 Cyl 2.2 L GAS
View related parts
1991 Mazda MX-6 Stabilizer Bar Part Number: GJ21-28-151A
Product Specifications
- Other Name: Stabilizer, Rear
- Item Weight: 8.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: GJ21-28-151A
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 1991 Mazda MX-6 Submodels:
- DX, GT, GT 4WS, LE, LX | 4 Cyl 2.2 L GAS

1991 Mazda MX-6 Sway Bar Parts and Q&A

Q: How to remove and install the sway bar on 1991 Mazda MX-6?
A: Raise vehicle on jackstands; remove front wheels, shields. Remove stabilizer bolts and rear bar. For front bar, remove rack-and-pinion bolts, pry assembly and feed bar out left well. Inspect and replace bushings; position bar with left mark; install left bushing aligned, notch rearward; torque bracket bolts, tighten end bolts/nuts.