How to properly replace the control arm on 1992 Mazda MPV?

Raise and support the rear, block front wheels, jack under the differential and secure coil springs with chains. Remove upper-arm pivot bolts and nuts, withdraw arm and inspect/replace bushings. Refit with new bolts, align axle, raise to ride height and tighten. Repeat removal, inspection and installation for lower arm.

Genuine 1992 Mazda MPV Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Control Arms found

View related parts
1992 Mazda MPV Lower Control Arm Part Number: LA12-34-350C
Product Specifications
- Other Name: Arm(Left), Lower
- Position: Left
- Item Weight: 5.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: LA12-34-350C
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 1992 Mazda MPV Submodels:
- Cargo, DX, ES, L, LX, LXE, Passenger | 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS
View related parts
1992 Mazda MPV Lower Control Arm Part Number: LA12-34-300C
Product Specifications
- Other Name: Arm Right, Lower
- Position: Right
- Item Weight: 5.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: LA12-34-300C
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 1992 Mazda MPV Submodels:
- Cargo, DX, ES, L, LX, LXE, Passenger | 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS
View related parts
1992 Mazda MPV Control Arm Part Number: LB82-34-300
Product Specifications
- Other Name: Arm, Lower; Control Arm
- Position: Lower
- Item Weight: 5.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: LB82-34-300
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 1992 Mazda MPV Submodels:
- Cargo, DX, ES, L, LX, LXE, Passenger | 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS

1992 Mazda MPV Control Arm Parts and Q&A

Q: How to properly replace the control arm on 1992 Mazda MPV?
A: Raise and support the rear, block front wheels, jack under the differential and secure coil springs with chains. Remove upper-arm pivot bolts and nuts, withdraw arm and inspect/replace bushings. Refit with new bolts, align axle, raise to ride height and tighten. Repeat removal, inspection and installation for lower arm.