How to disconnect and remove the battery, coolant recovery tank, and shock absorber while preparing to install a new bumper on 1994 Mazda RX-7?

Disconnect battery cables and remove battery, avoiding fender damage. Remove coolant tank. Disconnect front turn-signal wires and feed through the front body panel. Via hood-hinge access remove piston-rod nuts, raise and support car, remove grille screws. Mark and unbolt bumper/shock brackets, lift bumper, replace shock if out of spec, reassemble.

Genuine 1994 Mazda RX-7 Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Bumpers found

View related parts
1994 Mazda RX-7 Bumper Cover Part Number: FDY1-50-031
$761.79 MSRP: $1040.90
You Save: $279.11 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia, Front
- Replaces: FD01-50-031C
- Item Weight: 11.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: FDY1-50-031
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 1994 Mazda RX-7 Submodels:
- Base, R1, R2, Touring | 2 Cyl 1.3 L GAS
View related parts
1994 Mazda RX-7 Bumper Cover Part Number: FD01-50-231A
$238.39 MSRP: $317.91
You Save: $79.52 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Rear Lower
- Item Weight: 12.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: FD01-50-231A
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 1994 Mazda RX-7 Submodels:
- Base, R1, R2, Touring | 2 Cyl 1.3 L GAS
View related parts
1994 Mazda RX-7 Bumper Cover Part Number: FD01-50-221B
Product Specifications
- Other Name: Bumper, Rear
- Item Weight: 12.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: FD01-50-221B
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 1994 Mazda RX-7 Submodels:
- Base, R1, R2, Touring | 2 Cyl 1.3 L GAS

1994 Mazda RX-7 Bumper Parts and Q&A

Q: How to disconnect and remove the battery, coolant recovery tank, and shock absorber while preparing to install a new bumper on 1994 Mazda RX-7?
A: Disconnect battery cables and remove battery, avoiding fender damage. Remove coolant tank. Disconnect front turn-signal wires and feed through the front body panel. Via hood-hinge access remove piston-rod nuts, raise and support car, remove grille screws. Mark and unbolt bumper/shock brackets, lift bumper, replace shock if out of spec, reassemble.