How to remove and install the Brake Master Cylinder on 1995 Mazda Millenia?

In order to take out and fit the master cylinder, take off the negative battery cable and fluid level sensor connector. Take off the brake lines, tying them so that they do not drain. Disassemble the master cylinder and change the O-ring in case it needs it. Install, fill and bleed the new master cylinder. verify brakes are working well and without leakages.

Genuine 1995 Mazda Millenia Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Master Cylinder found

View related parts
1995 Mazda Millenia Master Cylinder Part Number: TA01-43-40Z
Product Specifications
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: TA01-43-40Z
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 1995 Mazda Millenia Submodels:
- Base, L, S | 6 Cyl 2.3 L GAS, 6 Cyl 2.5 L GAS

1995 Mazda Millenia Brake Master Cylinder Parts and Q&A

Q: How to remove and install the Brake Master Cylinder on 1995 Mazda Millenia?
A: In order to take out and fit the master cylinder, take off the negative battery cable and fluid level sensor connector. Take off the brake lines, tying them so that they do not drain. Disassemble the master cylinder and change the O-ring in case it needs it. Install, fill and bleed the new master cylinder. verify brakes are working well and without leakages.