How to access and remove the front, rear heater, and rear air conditioning blower motors on 1997 Mazda MPV?

Front blower: remove passenger trim, disconnect connector, remove screws and motor; install. Rear heater: warm, drain coolant, remove seat, plug hoses, disconnect connector, unbolt heater and motor; install reverse and refill coolant. Rear A/C: discharge system, disconnect battery, remove trim, disconnect lines/electrical, remove unit/motor; install reverse; shop evacuate, charge, leak-test.

Genuine 1997 Mazda MPV Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blower Motors found

View related parts
1997 Mazda MPV Blower Part Number: LA03-61-D80
$435.93 MSRP: $586.05
You Save: $150.12 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor, Fan Rear; Blower, Fan Motor
- Item Weight: 3.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: LA03-61-D80
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 1997 Mazda MPV Submodels:
- Cargo, DX, ES, L, LX, LXE, Passenger | 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS
View related parts
1997 Mazda MPV Motor Part Number: LA0161B10B
Product Specifications
- Other Name: Motor, Fan Blower Unit; Blower Motor
- Item Weight: 4.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: LA0161B10B
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 1997 Mazda MPV Submodels:
- DX, ES, LX | 6 Cyl 3.0 L GAS

1997 Mazda MPV Blower Motor Parts and Q&A

Q: How to access and remove the front, rear heater, and rear air conditioning blower motors on 1997 Mazda MPV?
A: Front blower: remove passenger trim, disconnect connector, remove screws and motor; install. Rear heater: warm, drain coolant, remove seat, plug hoses, disconnect connector, unbolt heater and motor; install reverse and refill coolant. Rear A/C: discharge system, disconnect battery, remove trim, disconnect lines/electrical, remove unit/motor; install reverse; shop evacuate, charge, leak-test.