How to remove and install a front control arm on 2002 Mazda Tribute?

The wheel lug nuts should be loosened, and the vehicle raised to take off the control arm. Take the control arm out of the steering knuckle and take out the required bolts. Test the arm of control against distortion and test bushings against wear. Installation is an opposite of removal so that all fasteners are tightened correctly.

Genuine 2002 Mazda Tribute Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Control Arms found

View related parts
2002 Mazda Tribute Lower Control Arm Part Number: EC01-34-300N
Product Specifications
- Other Name: Arm(Right), Lower; Bushing, Lower Control Arm
- Position: Lower
- Replaces: EC01-34-300E, EC01-34-300L, EC01-34-300J, EC01-34-300G, EC01-34-300D, EC01-34-300F, EC01-34-300H, ECTT-34-300L, EC01-34-300K, EC01-34-300M, EC01-34-300C, ZZTT-34-300
- Item Weight: 6.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: EC01-34-300N
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 2002 Mazda Tribute Submodels:
- DX, ES, LX | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
View related parts
2002 Mazda Tribute Lower Control Arm Part Number: EC01-34-350N
Product Specifications
- Other Name: Arm(Left), Lower
- Position: Left
- Replaces: EC01-34-350D, EC01-34-350L, EC01-34-350K, EC01-34-350E, EC01-34-350F, ECTT-34-350L, EC01-34-350M, EC01-34-350H, EC01-34-350G, EC01-34-350J, EC01-34-350C
- Item Weight: 5.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: EC01-34-350N
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 2002 Mazda Tribute Submodels:
- DX, ES, LX | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS

2002 Mazda Tribute Control Arm Parts and Q&A

Q: How to remove and install a front control arm on 2002 Mazda Tribute?
A: The wheel lug nuts should be loosened, and the vehicle raised to take off the control arm. Take the control arm out of the steering knuckle and take out the required bolts. Test the arm of control against distortion and test bushings against wear. Installation is an opposite of removal so that all fasteners are tightened correctly.