How to remove and install the control arm and trailing arm on 2003 Mazda Tribute?

Loosen lug nuts, raise and support vehicle, block wheels and remove wheel. Remove upper and lower arm ballstuds and inner pivots and remove arms. For the trailing arm remove springs, brakes, hoses and sensors. Replace pivot bushings if needed, align marks, raise rear, tighten and check alignment.

Genuine 2003 Mazda Tribute Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Control Arms found

View related parts
2003 Mazda Tribute Lower Control Arm Part Number: EC01-34-300N
Product Specifications
- Other Name: Arm(Right), Lower; Bushing, Lower Control Arm
- Position: Lower
- Replaces: EC01-34-300E, EC01-34-300L, EC01-34-300J, EC01-34-300G, EC01-34-300D, EC01-34-300F, EC01-34-300H, ECTT-34-300L, EC01-34-300K, EC01-34-300M, EC01-34-300C, ZZTT-34-300
- Item Weight: 6.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: EC01-34-300N
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 2003 Mazda Tribute Submodels:
- DX, ES, LX | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
View related parts
2003 Mazda Tribute Lower Control Arm Part Number: EC01-34-350N
Product Specifications
- Other Name: Arm(Left), Lower
- Position: Left
- Replaces: EC01-34-350D, EC01-34-350L, EC01-34-350K, EC01-34-350E, EC01-34-350F, ECTT-34-350L, EC01-34-350M, EC01-34-350H, EC01-34-350G, EC01-34-350J, EC01-34-350C
- Item Weight: 5.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: EC01-34-350N
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 2003 Mazda Tribute Submodels:
- DX, ES, LX | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS

2003 Mazda Tribute Control Arm Parts and Q&A

Q: How to remove and install the control arm and trailing arm on 2003 Mazda Tribute?
A: Loosen lug nuts, raise and support vehicle, block wheels and remove wheel. Remove upper and lower arm ballstuds and inner pivots and remove arms. For the trailing arm remove springs, brakes, hoses and sensors. Replace pivot bushings if needed, align marks, raise rear, tighten and check alignment.