How to replace the Rack and Pinion Boot on 2006 Mazda 6?

Loosen lug nuts, raise and support on jack stands, remove wheel. Remove tie-rod end with jam nut. Remove outer clamp with pliers, cut inner clamp and slide off boot. Tape threads, seat new Rack and Pinion Boot and clamps, remove tape, reinstall tie-rod end and wheel, lower vehicle and torque to spec.

Genuine 2006 Mazda 6 Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Rack and Pinion Boot found

View related parts
2006 Mazda 6 Boot Part Number: GJ6A-32-12X
$78.94 MSRP: $105.26
You Save: $26.32 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Set, Steering Gear; Boot
- Item Weight: 0.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: GJ6A-32-12X
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 2006 Mazda 6 Submodels:
- i, Mazdaspeed, S | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

2006 Mazda 6 Rack and Pinion Boot Parts and Q&A

Q: How to replace the Rack and Pinion Boot on 2006 Mazda 6?
A: Loosen lug nuts, raise and support on jack stands, remove wheel. Remove tie-rod end with jam nut. Remove outer clamp with pliers, cut inner clamp and slide off boot. Tape threads, seat new Rack and Pinion Boot and clamps, remove tape, reinstall tie-rod end and wheel, lower vehicle and torque to spec.