What are the instructions for removing both cylinder heads in V6 engine on 2006 Mazda Tribute?

The manual explains how to remove cylinder heads, including that when one is required only, then the remainder of the steps can be omitted. First off, relieve fuel pressure, remove battery and empty fluids. Take away different engine parts, connect and loosen cylinder head bolts. Wipe down and re-wipe clean surfaces, fit new gaskets, and reassemble parts, making sure they are tightly screwed together.

Genuine 2006 Mazda Tribute Cylinder Head

Head

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Cylinder Heads found

View related parts
2006 Mazda Tribute Cylinder Head Part Number: ZZC2-10-100R-00
Product Specifications
- Other Name: Reman, Head Right Cylinder
- Item Weight: 36.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: ZZC2-10-100R-00
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 2006 Mazda Tribute Submodels:
- DX, ES, LX, S | 6 Cyl 3.0 L GAS
View related parts
2006 Mazda Tribute Cylinder Head Part Number: ZZCA-10-10XR-00
Product Specifications
- Other Name: Head, Cylinder-Sub
- Item Weight: 36.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: ZZCA-10-10XR-00
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 2006 Mazda Tribute Submodels:
- Hybrid, i | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS

2006 Mazda Tribute Cylinder Head Parts and Q&A

Q: What are the instructions for removing both cylinder heads in V6 engine on 2006 Mazda Tribute?
A: The manual explains how to remove cylinder heads, including that when one is required only, then the remainder of the steps can be omitted. First off, relieve fuel pressure, remove battery and empty fluids. Take away different engine parts, connect and loosen cylinder head bolts. Wipe down and re-wipe clean surfaces, fit new gaskets, and reassemble parts, making sure they are tightly screwed together.