How to replace the Crankshaft Position Sensor on 2008 Mazda Tribute?

For earlier four-cylinder models disconnect the negative battery, remove the exhaust manifold, locate the CKP sensor near the flywheel, disconnect its connector, remove the mounting bolt and sensor. Reinstall in reverse and allow the PCM to relearn idle/fuel trims. For other models follow similar removal, TDC/alignment, and relearn/correction procedures.

Genuine 2008 Mazda Tribute Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Crankshaft Position Sensors found

View related parts
2008 Mazda Tribute Crankshaft Position Sensor Part Number: GY07-18-221A
$38.25 MSRP: $51.01
You Save: $12.76 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crankshaft Position; Crankshaft Sensor
- Replaces: GY07-18-221, GY01-18-221
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: GY07-18-221A
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 2008 Mazda Tribute Submodels:
- DX, ES, LX, S | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2008 Mazda Tribute Crankshaft Position Sensor Part Number: ZZC0-18-230
$60.19 MSRP: $80.26
You Save: $20.07 (26%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Crankshaft Position; Crankshaft Sensor
- Replaces: 1F20-67-082, 1F20-67-082A, LF01-18-221
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: ZZC0-18-230
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 2008 Mazda Tribute Submodels:
- Hybrid, i, S | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

2008 Mazda Tribute Crankshaft Position Sensor Parts and Q&A

Q: How to replace the Crankshaft Position Sensor on 2008 Mazda Tribute?
A: For earlier four-cylinder models disconnect the negative battery, remove the exhaust manifold, locate the CKP sensor near the flywheel, disconnect its connector, remove the mounting bolt and sensor. Reinstall in reverse and allow the PCM to relearn idle/fuel trims. For other models follow similar removal, TDC/alignment, and relearn/correction procedures.