How to remove and install fenders on 2008 Mazda Tribute?

Unscrew lug nuts of the front wheel, lift the car, and take off the wheels. Take out headlight housings, splash shields, and mouldings and bolts. In the case of 4WD, eliminate rocker panel molding and clips. Unscrew fender bolts, place fender like this up-hill with help, and screw in same direction in reverse order with great attention to proper alignment before tightening.

Genuine 2008 Mazda Tribute Fender

Wheel Fender

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Fenders found

View related parts
2008 Mazda Tribute Fender Part Number: ZZCA-52-110
$190.89 MSRP: $254.57
You Save: $63.68 (26%)
ADD TO CART
Product Specifications
- Other Name: Panel Right, Fender Front
- Position: Right
- Item Weight: 10.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: ZZCA-52-110
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 2008 Mazda Tribute Submodels:
- Hybrid, i, S | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2008 Mazda Tribute Fender Part Number: ZZCA-52-210
Product Specifications
- Other Name: Panel Left, Fender Front
- Position: Left
- Item Weight: 11.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: ZZCA-52-210
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 2008 Mazda Tribute Submodels:
- Hybrid, i, S | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2008 Mazda Tribute Fender Parts and Q&A

Q: How to remove and install fenders on 2008 Mazda Tribute?
A: Unscrew lug nuts of the front wheel, lift the car, and take off the wheels. Take out headlight housings, splash shields, and mouldings and bolts. In the case of 4WD, eliminate rocker panel molding and clips. Unscrew fender bolts, place fender like this up-hill with help, and screw in same direction in reverse order with great attention to proper alignment before tightening.