How to remove and install the Wheel Seal on 2010 Mazda Tribute?

Take off the cover on the wheel then loosened the hub nut using a socket. Weaken the wheel lug nuts, lift the vehicle and hold it in place. Take out the right driveaxle, exhaust crossover pipe and heat shield. Install new oil seal, lubricate and replace components in that order. Examine the check case lubricant level.

Genuine 2010 Mazda Tribute Wheel Seal

Wheel Axle Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wheel Seal found

View related parts
2010 Mazda Tribute Seal Part Number: ZZC0-27-238
$14.50 MSRP: $19.34
You Save: $4.84 (26%)
ADD TO CART
Product Specifications
- Other Name: Seal, Oil; Axle Seal, Side Seals
- Position: Left
- Replaces: ZZP0-88-166A, ZZP0-88-166, NA01-27-238
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: ZZC0-27-238
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 2010 Mazda Tribute Submodels:
- Hybrid, i, S | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2010 Mazda Tribute Wheel Seal Parts and Q&A

Q: How to remove and install the Wheel Seal on 2010 Mazda Tribute?
A: Take off the cover on the wheel then loosened the hub nut using a socket. Weaken the wheel lug nuts, lift the vehicle and hold it in place. Take out the right driveaxle, exhaust crossover pipe and heat shield. Install new oil seal, lubricate and replace components in that order. Examine the check case lubricant level.