How to properly replace a Rack and Pinion Boot on 2014 Mazda MX-5 Miata?

Unscrew the lug nuts, elevate the car, and put it on jackstands, and then unscrew the wheel. Take the tie-rod end and jam nut off, remove the rack and pinion boot clamps. Tape the threads on the steering rod and fit the new boot and the clamps. Lastly, re-fit the wheel and have it correctly aligned.

Genuine 2014 Mazda MX-5 Miata Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Rack and Pinion Boots found

View related parts
2014 Mazda MX-5 Miata Dust Cover Part Number: NE51-32-112
$7.14 MSRP: $9.52
You Save: $2.38 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Dust
- Item Weight: 0.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: NE51-32-112
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 2014 Mazda MX-5 Miata Submodels:
- 25th Anniversary Edition, Base, Club, Club Spec, Grand Touring, Special Edition, Sport, SV, Touring | 4 Cyl 2.0 L GAS
View related parts
2014 Mazda MX-5 Miata Tie Rod Boot Part Number: NE59-32-12X
$114.55 MSRP: $152.76
You Save: $38.21 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot, Rack; Boot Kit
- Position: Right
- Item Weight: 0.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: NE59-32-12X
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 2014 Mazda MX-5 Miata Submodels:
- 25th Anniversary Edition, Base, Club, Club Spec, Grand Touring, Special Edition, Sport, SV, Touring | 4 Cyl 2.0 L GAS

2014 Mazda MX-5 Miata Rack and Pinion Boot Parts and Q&A

Q: How to properly replace a Rack and Pinion Boot on 2014 Mazda MX-5 Miata?
A: Unscrew the lug nuts, elevate the car, and put it on jackstands, and then unscrew the wheel. Take the tie-rod end and jam nut off, remove the rack and pinion boot clamps. Tape the threads on the steering rod and fit the new boot and the clamps. Lastly, re-fit the wheel and have it correctly aligned.