How do Rack and Pinions play a role in disconnecting and replacing the steering gear assembly on 2014 Mazda MX-5 Miata?

Disconnect negative battery cable. Loose front lug nuts, raise and support the vehicle, park and leave wheels and engine undercover. Equip drain and cap power-steering lines. Disassemble and label steering column U-joints and tie-rods, remove and install rack and pinions, re-connect starving hoses, fill reservoir, lower, bleed and check alignment.

Genuine 2014 Mazda MX-5 Miata Rack and Pinions

Steering Rack

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Rack and Pinions found

View related parts
2014 Mazda MX-5 Miata Rack Part Number: NE51-32-119
$187.28 MSRP: $249.75
You Save: $62.47 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rack, Steering Gear; Rack
- Item Weight: 5.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: NE51-32-119
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 2014 Mazda MX-5 Miata Submodels:
- 25th Anniversary Edition, Base, Club, Club Spec, Grand Touring, Special Edition, Sport, SV, Touring | 4 Cyl 2.0 L GAS
View related parts
2014 Mazda MX-5 Miata Steering Gear Part Number: NE51-32-110R-0C
Product Specifications
- Other Name: Reman, Steering Gear; Gear Assembly
- Item Weight: 22.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: NE51-32-110R-0C
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 2014 Mazda MX-5 Miata Submodels:
- 25th Anniversary Edition, Base, Club, Club Spec, Grand Touring, Special Edition, Sport, SV, Touring | 4 Cyl 2.0 L GAS

2014 Mazda MX-5 Miata Rack and Pinions Parts and Q&A

Q: How do Rack and Pinions play a role in disconnecting and replacing the steering gear assembly on 2014 Mazda MX-5 Miata?
A: Disconnect negative battery cable. Loose front lug nuts, raise and support the vehicle, park and leave wheels and engine undercover. Equip drain and cap power-steering lines. Disassemble and label steering column U-joints and tie-rods, remove and install rack and pinions, re-connect starving hoses, fill reservoir, lower, bleed and check alignment.