How to access and replace the different car bulbs and Interior Light Bulb on Mazda 3?

To access the front turn signal and parking light bulbs on the driver's side headlight housing, remove the battery air inlet and the air filter housing air inlet duct. For the passenger's side, detach and set aside the power steering fluid reservoir. Turn the bulb holder counterclockwise to remove it from the headlight housing without disconnecting the electrical connector. Pull the bulb straight out of the holder for replacement, and installation follows the reverse order. For front side marker light bulbs in 2010 and earlier models, push the back of the side marker light housing forward to lift it out, disconnect the electrical connector, and pull the bulb straight out. Installation requires ensuring the hook end goes in first before snapping the housing in place. In 2011 models, if the bulb is not working, the entire side marker light assembly must be replaced. Detach the mirror glass and its holder, disconnect the electrical connector if equipped with heated mirrors, and remove the side marker while detaching the tab, with installation reversing the removal steps. For fog light bulbs, raise the front of the vehicle, remove the fasteners to pull back the inner fender splash shield, disconnect the electrical connector, and turn the fog light bulb counterclockwise to remove it. Insert the new bulb and turn it clockwise to lock it in place, with installation otherwise reversing the removal. For the center high-mounted brake light bulb in 4-door models, remove the trunk lid trim, rotate the bulb holder counterclockwise to pull it out, and remove the bulb straight from the holder, with installation reversing the removal. In liftgate models, open the liftgate, pry out the upper section of trim, and follow the same steps as for the 4-door models. For taillight bulbs, fold back the trunk floor carpeting, reposition the flexible trunk side trim panel, rotate the taillight bulb socket counterclockwise to remove it, and pull the bulb straight out. Installation is the reverse of removal. For license plate light bulbs, unclip the housing, rotate the socket counterclockwise to remove it, and pull the bulb straight out, with installation reversing the removal. For interior map light bulbs, pry the housing down to disengage the clips, disconnect the electrical connector, rotate the socket counterclockwise to remove it, and pull the bulb straight out. Installation follows the reverse order. For overhead light bulbs, pry off the lens, pull the bulb straight out, and installation is the reverse of removal.

Genuine Mazda 3 Interior Light Bulb

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Interior Light Bulbs found

View related parts
Mazda 3 Bulb Part Number: 9970-05-100L
$5.44 MSRP: $7.26
You Save: $1.82 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 9970-05-100
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2004-2018 Mazda 3 | Grand Touring, I Sport, I Touring, Mazdaspeed, S, SP23, Sport, Touring, i, i Grand Touring, i SV, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Bulb Part Number: 9970-05-080L
$5.04 MSRP: $6.72
You Save: $1.68 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 9970-05-080, 0000-11-3175
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2010 Mazda 3 | Mazdaspeed, S, i | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Bulb Part Number: H450-55-431
$5.51 MSRP: $7.36
You Save: $1.85 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb, Glovebox/Airbag
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2010-2013 Mazda 3 | Mazdaspeed, S, i | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Bulb Part Number: BP4K-61-C95
$8.65 MSRP: $11.54
You Save: $2.89 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb, Mode Control
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2004-2009 Mazda 3 | Mazdaspeed, S, SP23, i | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Mazda 3 Cargo Lamp Part Number: D651-51-440B
$43.69 MSRP: $58.27
You Save: $14.58 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp, Cargo Room
- Position: Driver Side
- Replaces: D651-51-440A, KD45-51-440
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2010-2018 Mazda 3 | Grand Touring, I Sport, I Touring, Mazdaspeed, S, Sport, Touring, i, i Grand Touring, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Bulb Part Number: 0000-11-3022
$2.40 MSRP: $3.19
You Save: $0.79 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cargo Lamp Bulb
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2004-2009 Mazda 3 | Mazdaspeed, S, SP23 | 4 Cyl 2.3 L GAS
View related parts
Mazda 3 Bulb Part Number: 0000-11-0194
$0.55 MSRP: $0.73
You Save: $0.18 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 9970-16-038, 9970-16-030, 9970-16-036, ZZL0-55-431
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2004-2018 Mazda 3 | Grand Touring, I Sport, I Touring, Mazdaspeed, S, SP23, Sport, Touring, i, i Grand Touring, i SV, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Bulb Part Number: BBM4-51-4C5
$12.98 MSRP: $17.31
You Save: $4.33 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2011-2018 Mazda 3 | Grand Touring, I Sport, I Touring, Mazdaspeed, S, Sport, Touring, i, i Grand Touring, i SV, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Bulb Part Number: F151-68-4G3
$5.51 MSRP: $7.36
You Save: $1.85 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb, Sunvisor; Visor Lamp Bulb
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2010-2018 Mazda 3 | Grand Touring, I Sport, I Touring, Mazdaspeed, S, Sport, Touring, i, i Grand Touring, i SV, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Cargo Lamp Bulb Part Number: D651-51-4C5
$6.51 MSRP: $8.68
You Save: $2.17 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2010-2018 Mazda 3 | Grand Touring, I Sport, I Touring, Mazdaspeed, S, Sport, Touring, i, i Grand Touring, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Bulb Part Number: B456-60-223
$3.83 MSRP: $5.10
You Save: $1.27 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb & Socket
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2004-2013 Mazda 3 | Mazdaspeed, S, SP23, i | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Bulb Part Number: BP4M-61-C95A
$8.23 MSRP: $10.97
You Save: $2.74 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb, Mode Control
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2007-2009 Mazda 3 | Mazdaspeed, S, i | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Mazda 3 Cargo Lamp Part Number: BCKD-51-440
$12.28 MSRP: $16.37
You Save: $4.09 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp, Cargo Room
- Position: Driver Side
- Replaces: DGH9-51-430
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2019-2025 Mazda 3 | 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Bulb Part Number: BCJH-51-4C5A
$2.46 MSRP: $3.28
You Save: $0.82 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Interior Bulb
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2019-2024 Mazda 3 | 2.0, 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Bulb Part Number: BBM4-61-C95
Product Specifications
- Other Name: Bulb, Mode Control
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2010-2013 Mazda 3 | Mazdaspeed, S, i | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS

Mazda 3 Interior Light Bulb

The Mazda 3 Interior Light Bulb enables the people inside the trip to quickly find items, check maps, and view the instrument panel when outside lighting is lacking. The bulb is a member of a family of interior lamps, such as the dome, courtesy, glove box, map, dash, gauge, and indicator lights. All these lamps utilize particular bulb sizes, shapes, and amperages that suit their individual tasks. The unit, which is powered through a dedicated fuse, is inside a small housing on which is fitted a lens that may be held in position by screws, clips, or slots. When the switch or door trigger is turned on, current is allowed to flow through the bulb. The glowing part of the bulb sends light through the clear glass to illuminate the area. If the bulb fails, it will show up as grey and not produce any light. As a result, the cabin will be dark and the displays could potentially obstruct, like speed, engine temperature, and warning icons. When there is a lack of visibility of the Mazda 3 light, switch off the light first, unscrew the lens with the help of a screwdriver or a gentle prying tool, pull out the light bulb, dust off the area with a slightly moist cloth, and insert a fresh Interior Light Bulb before refitting the lens. It is also worth checking the fuse in a Mazda 3, especially where a number of bulbs are on the same circuit and none are working. Having a regular inspection and timely replacement of each Interior Light Bulb will help in keeping the driver alert and providing everyday convenience for Mazda customers.

Looking for Interior Light Bulb with proven quality? Choose OEM Interior Light Bulb. Mazda designs and builds them to strict factory specs. Every piece goes through rigorous quality checks. You'll get parts that fit right and work like new. Shop our huge inventory of OEM Mazda 3 parts. Enjoy the highly competitive prices online. Our site is your one-stop shop. Each genuine 3 part includes a manufacturer's warranty. Buy with confidence. Our return policy is simple and hassle-free. In a rush? Choose expedited delivery at checkout. You'll love the streamlined experience from search to checkout to receiving your order.

Mazda 3 Interior Light Bulb Parts and Q&A

Bulb
0000-11-3022
Q:
How to access and replace the different car bulbs and Interior Light Bulb on Mazda 3?
A:
To access the front turn signal and parking light bulbs on the driver's side Headlight housing, remove the battery air inlet and the air filter housing air inlet duct. For the passenger's side, detach and set aside the power steering fluid reservoir. Turn the bulb holder counterclockwise to remove it from the headlight housing without disconnecting the electrical connector. Pull the bulb straight out of the holder for replacement, and installation follows the reverse order. For front side marker light bulbs in 2010 and earlier models, push the back of the side marker light housing forward to lift it out, disconnect the electrical connector, and pull the bulb straight out. Installation requires ensuring the hook end goes in first before snapping the housing in place. In 2011 models, if the bulb is not working, the entire side marker light assembly must be replaced. Detach the mirror glass and its holder, disconnect the electrical connector if equipped with heated mirrors, and remove the side marker while detaching the tab, with installation reversing the removal steps. For fog light bulbs, raise the front of the vehicle, remove the fasteners to pull back the inner fender splash shield, disconnect the electrical connector, and turn the fog light bulb counterclockwise to remove it. Insert the new bulb and turn it clockwise to lock it in place, with installation otherwise reversing the removal. For the center high-mounted brake light bulb in 4-door models, remove the trunk lid trim, rotate the bulb holder counterclockwise to pull it out, and remove the bulb straight from the holder, with installation reversing the removal. In liftgate models, open the liftgate, pry out the upper section of trim, and follow the same steps as for the 4-door models. For taillight bulbs, fold back the trunk floor carpeting, reposition the flexible trunk side trim panel, rotate the taillight bulb socket counterclockwise to remove it, and pull the bulb straight out. Installation is the reverse of removal. For license plate light bulbs, unclip the housing, rotate the socket counterclockwise to remove it, and pull the bulb straight out, with installation reversing the removal. For interior map light bulbs, pry the housing down to disengage the clips, disconnect the electrical connector, rotate the socket counterclockwise to remove it, and pull the bulb straight out. Installation follows the reverse order. For overhead light bulbs, pry off the lens, pull the bulb straight out, and installation is the reverse of removal.