What are the methods to repair oil leaks from axle shaft seals on Mazda 323?

The oil leaks are common since the driveaxle oil seals or the speedometer drive gear oil seal and O-rings are often worn. These seals can be replaced relatively simple, because they can be repaired in most cases without the need to take off the transaxle of the car. The driveaxle oil seals are fitted on the sides of the transaxle, at the inner ends of the driveaxles, which connect into the gears of the differential side. When there is a suspected leak of a driveaxle oil seal ensure that the vehicle is elevated and safely placed on jackstands. A loose seal will indicate the presence of lubricant on the side of the transaxle, under the seal. First of all, take off the driveaxle. Carefully loosen the oil seal of the transaxle bore using a screwdriver or pry bar without damaging the seal bore since this can make the new seal leak. In case the oil seal cannot be removed using a screwdriver or pry bar, then it will need a special oil seal removal tool. Installing the new oil seal requires a seal installer, a big piece of pipe, or a big deep socket to act as a drift, and forcefully drive it into the bore, fully seated, it should come out flat on the surface of the transaxle housing. Lastly, apply lubrication to the lip of the new seal with automatic transmission fluid, but ensure not to destroy lip of new seal during the process of reinstalling the driveaxle.

Genuine Mazda 323 Axle Shaft Seal

CV Axle Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Axle Shaft Seals found

View related parts
Mazda 323 Seal Part Number: G304-33-065
$13.66 MSRP: $18.22
You Save: $4.56 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Seal
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1990-1994 Mazda 323 | Base, SE | 4 Cyl 1.6 L GAS
View related parts
Mazda 323 Bearing Seal Part Number: B210-33-065
$13.03 MSRP: $17.37
You Save: $4.34 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Seal; Bearing Seal, Hub Seal
- Position: Inner
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1988-1989 Mazda 323 | Base, DX, GT, GTX, LX, SE | 4 Cyl 1.6 L GAS
View related parts
Mazda 323 Axle Seals Part Number: T005-27-238A
$16.06 MSRP: $21.42
You Save: $5.36 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Oil; Axle Seal
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1988-1991 Mazda 323 | Base, DX, GT, GTX, LX, SE | 4 Cyl 1.6 L GAS
View related parts
Mazda 323 Pinion Seal Part Number: T005-27-165A
$2.67 MSRP: $24.19
You Save: $21.52 (89%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Seal
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1988-1991 Mazda 323 | Base, DX, GT, GTX, LX, SE | 4 Cyl 1.6 L GAS
View related parts
Mazda 323 Bearing Seal Part Number: B092-33-067
$1.22 MSRP: $1.60
You Save: $0.38 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Seal; Bearing Seal, Hub Seal, Wheel Bearing Oil Seal
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1986-1989 Mazda 323 | Base, DX, GT, GTX, LX, SE | 4 Cyl 1.6 L GAS
View related parts
Mazda 323 Bearing Seal Part Number: B210-33-067
$2.04 MSRP: $2.68
You Save: $0.64 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Seal; Hub Seal
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1988-1989 Mazda 323 | Base, DX, GT, GTX, LX, SE | 4 Cyl 1.6 L GAS
View related parts
Mazda 323 Hub Seals Part Number: B001-33-065A
Product Specifications
- Other Name: Oil Seal; Hub Seal, Wheel Bearing Oil Seal
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1986-1989 Mazda 323 | Base, DX, GT, GTX, LX, SE | 4 Cyl 1.6 L GAS
View related parts
Mazda 323 Bearing Seal Part Number: B001-26-154B
Product Specifications
- Other Name: Oil Seal; Bearing Seal, Hub Seal, Wheel Bearing Seal
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1986-1989 Mazda 323 | Base, DX, GT, GTX, LX, SE | 4 Cyl 1.6 L GAS

Mazda 323 Axle Shaft Seal

Looking for Axle Shaft Seal with proven quality? Choose OEM Axle Shaft Seal. Mazda designs and builds them to strict factory specs. Every piece goes through rigorous quality checks. You'll get parts that fit right and work like new. Shop our huge inventory of OEM Mazda 323 parts. Enjoy the highly competitive prices online. Our site is your one-stop shop. Each genuine 323 part includes a manufacturer's warranty. Buy with confidence. Our return policy is simple and hassle-free. In a rush? Choose expedited delivery at checkout. You'll love the streamlined experience from search to checkout to receiving your order.

Mazda 323 Axle Shaft Seal Parts and Q&A

Seal
G304-33-065
Q: What are the methods to repair oil leaks from axle shaft seals on Mazda 323?
A:
The oil leaks are common since the driveaxle oil seals or the speedometer drive gear oil seal and O-rings are often worn. These seals can be replaced relatively simple, because they can be repaired in most cases without the need to take off the transaxle of the car. The driveaxle oil seals are fitted on the sides of the transaxle, at the inner ends of the driveaxles, which connect into the gears of the differential side. When there is a suspected leak of a driveaxle oil seal ensure that the vehicle is elevated and safely placed on jackstands. A loose seal will indicate the presence of lubricant on the side of the transaxle, under the seal. First of all, take off the driveaxle. Carefully loosen the oil seal of the transaxle bore using a screwdriver or pry bar without damaging the seal bore since this can make the new seal leak. In case the oil seal cannot be removed using a screwdriver or pry bar, then it will need a special oil seal removal tool. Installing the new oil seal requires a seal installer, a big piece of pipe, or a big deep socket to act as a drift, and forcefully drive it into the bore, fully seated, it should come out flat on the surface of the transaxle housing. Lastly, apply lubrication to the lip of the new seal with automatic transmission fluid, but ensure not to destroy lip of new seal during the process of reinstalling the driveaxle.