How to remove the front and rear bumper cover on Mazda 6?

Removing the front bumper cover begins by disconnecting the cable off the negative battery terminal. Unscrew the lug nuts in the front wheel, and lift the vehicle and place it on jackstands to be there securely, and then take off the front wheels. Then remove the splash shield mounting fasteners and take off splash shields. Detach the upper mounting clamps of the bumper cover of the radiator support with the exception of 2009 and subsequent models, the rubber hood stops should be removed. To remove bumper cover-to-fender mounting fastener, pull back the inner fenderwell, and then access the mount mount. Unplug the electrical connector of the marker lights and fog lights, when fitted. Partial Disassemble the bumper cover mounting tabs along upper rear edges out of the lower side of lower edge of front fenders by pulling bumper cover outwards, beginning on fender side then to the middle. Do a final inspection using flashlight to make sure that the bumper cover is fully removed, that all the electrical connectors are disconnected, and that all wiring harnesses are well out of the way. It will be necessary that with help the front bumper cover be removed and then it is the same procedure to install as it was to remove. To remove the rear bumper cover, you will first have to take off the taillight housing assemblies and the bumper cover mounting fasteners. Relax the wheel nuts of the rear and lift the vehicle on jackstands and ensure it is properly supported then remove the rear wheels. Take the mounting fasteners off the underside of the rear bumper cover, and the rear of the wheel wells. Check again with a flashlight to ensure that the bumper cover is fully removed, all electrical connectors are un-plugged and all wiring Harnesses are clear of the workspace. With the help, take off the bumper cover at the rear, but in the case of 2009 and later models, the bumper cover finishes at the fenderwell are pulled outwards to release the mounting clips in the bracket. The opposite of removal is the installation, and it is better to be assisted in placing the bumper cover in the right place.

Genuine Mazda 6 Bumper Cover

Bumper Shell

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

23 Bumper Covers found

View related parts
Mazda 6 Bumper Cover Part Number: GSYL-50-031C-BB
$345.46 MSRP: $460.70
You Save: $115.24 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Front
- Replaces: GSYL-50-031, GSYL-50-031D, GSYL-50-031C, GSYL-50-031A, GSYL-50-031B-BB, GSYL-50-031B
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2009-2013 Mazda 6 | S, i | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Mazda 6 Bumper, Front Part Number: GMY3-50-031
$454.61 MSRP: $611.16
You Save: $156.55 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: BUMPER,FRONT; Bumper Cover
- Position: Front
- Replaces: GMN3-50-031C-BB, GMN3-50-031B-BB
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2016-2017 Mazda 6 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda 6 Bumper, Front Part Number: GHY9-50-031
$365.01 MSRP: $486.79
You Save: $121.78 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: BUMPER, FRT; Bumper Cover
- Position: Front
- Replaces: GHP9-50-031B-BB, GHP9-50-031A-BB, GHP9-50-031-BB, GHP9-50-031C-8P, GHP9-50-031C-BB
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2014-2017 Mazda 6 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda 6 Bumper, Rear Part Number: GJY9-50-221
$380.66 MSRP: $511.73
You Save: $131.07 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: BUMPER, RR; Bumper Cover
- Position: Rear
- Replaces: GJR9-50-221A, GJR9-50-221A-BB, GJR9-50-221-BB
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2014-2017 Mazda 6 | Grand Touring, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda 6 Bumper Cover Part Number: GSH7-50-221B-BB
$706.05 MSRP: $964.74
You Save: $258.69 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Rear
- Replaces: GSH7-50-221-BB, GSH7-50-221A-BB
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2018-2021 Mazda 6 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda 6 Bumper Cover Part Number: GSK1-50-221A-BB
$593.75 MSRP: $798.21
You Save: $204.46 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Rear
- Replaces: GSK1-50-221-BB
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2018-2021 Mazda 6 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda 6 Bumper Cover Part Number: GBVG-50-221B-BB
$706.05 MSRP: $964.74
You Save: $258.69 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Rear
- Replaces: GBVG-50-221-BB, GBVG-50-221A-BB
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2018-2021 Mazda 6 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda 6 Bumper Cover Part Number: GPYA-50-031A-BB
$302.66 MSRP: $403.64
You Save: $100.98 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Front
- Replaces: GPYA-50-031, GPYA-50-031A
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2006-2008 Mazda 6 | S, i | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda 6 Bumper Cover Part Number: GSYL-50-221B-BB
$379.44 MSRP: $510.09
You Save: $130.65 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Rear I4
- Replaces: GSYL-50-221B, GSYL-50-221C, GSYL-50-22XB, GSYL-50-22XB-BB, GS3L-50-221A, GSYL-50-221D, GSYL-50-22X
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2012-2013 Mazda 6 | i | 4 Cyl 2.5 L GAS
View related parts
Mazda 6 Bumper Cover Part Number: GSH7-50-031-BB
$556.23 MSRP: $747.77
You Save: $191.54 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Front
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2018-2021 Mazda 6 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda 6 Bumper Cover Part Number: GP9A-50-031F-BB
$562.75 MSRP: $756.53
You Save: $193.78 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Front
- Replaces: GP9A-50-031F-AA, GP9A-50-031-AA, GP9A-50-031E, GP9A-50-031E-AA, GP9A-50-031C
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2006-2007 Mazda 6 | Mazdaspeed | 4 Cyl 2.3 L GAS
View related parts
Mazda 6 Bumper Cover Part Number: GSJ8-50-031-BB
$588.16 MSRP: $790.69
You Save: $202.53 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Front
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2018-2021 Mazda 6 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda 6 Bumper Cover Part Number: GSK2-50-221A-BB
$593.75 MSRP: $798.21
You Save: $204.46 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper, Rear
- Replaces: GSK2-50-221-BB
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2018-2021 Mazda 6 | Carbon Edition, Grand Touring, Grand Touring Reserve, Signature, Sport, Touring | 4 Cyl 2.5 L GAS
View related parts
Mazda 6 Bumper Cover Part Number: GPYA-50-221-BB
Product Specifications
- Other Name: Bumper, Rear
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2006-2008 Mazda 6 | S, i | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mazda 6 Bumper Cover Part Number: GP9A-50-221C-BB
Product Specifications
- Other Name: Bumper, Rear
- Replaces: GP9A-50-221C-AA, GP9A-50-221-AA
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2006-2007 Mazda 6 | Mazdaspeed | 4 Cyl 2.3 L GAS
View related parts
Mazda 6 Bumper Cover Part Number: GSYH-50-221C-BB
Product Specifications
- Other Name: Bumper, Rear V6
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2009-2013 Mazda 6 | S | 6 Cyl 3.7 L GAS
View related parts
Mazda 6 Bumper Cover Part Number: GRYJ-50-221-BB
Product Specifications
- Other Name: Bumper, Rear
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2006-2007 Mazda 6 | S | 6 Cyl 3.0 L GAS
View related parts
Mazda 6 Bumper Cover Part Number: GMYF-50-221B-BB
Product Specifications
- Other Name: Bumper, Rear
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2004-2005 Mazda 6 | S | 6 Cyl 3.0 L GAS
View related parts
Mazda 6 Bumper Cover Part Number: GMYE-50-221A-BB
Product Specifications
- Other Name: Bumper, Rear
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2004-2005 Mazda 6 | S | 6 Cyl 3.0 L GAS
View related parts
Mazda 6 Bumper Cover Part Number: GKYC-50-221-BB
Product Specifications
- Other Name: Bumper, Rear
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2003-2005 Mazda 6 | S, i | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

| Page 1 of 2 |Next >

1-20 of 23 Results

Mazda 6 Bumper Cover

The Mazda 6 Bumper Cover is a soft outer panel that covers the stiff bumper below and aids in styling and aerodynamics. The airfoil is flush with the surrounding body panels in order to improve airflow around the vehicle. This may help with speed and fuel economy. In a bumper assembly, other parts are also applied, such as grille inserts, light bezels or lens, tow-hook cover, and decorative mouldings. However, the Bumper Cover is the foremost visible surface. The openings built into the cover allow air to flow to the radiator, oil coolers, or brakes. Holes are also present for mounting fog lights, parking lights, or turn signals. Where a particular Mazda doesn't get those options, matching trim or blank panels fill the holes for appearance. Contemporary cars feature a fitting position for a screw-on towing eye located behind the cover. Consequently, a modest detachable panel on the Bumper Cover conceals this fixture until its use becomes necessary. As a result of its placement, the panel absorbs first contact in minor collisions and typically suffers scratches and cracks. Further, it ages through fading as a result of UV exposure or through road debris damage. In any impact assessment, all inserts and attachments of the Mazda 6 bumper area must be checked so that damaged items can be replaced with new ones. This will help restore the functionality, airflow management, and aesthetic continuity of the vehicle. The result protects some core structures on the 6 and keeps every Mazda looking similar.

Looking for Bumper Cover with proven quality? Choose OEM Bumper Cover. Mazda designs and builds them to strict factory specs. Every piece goes through rigorous quality checks. You'll get parts that fit right and work like new. Shop our huge inventory of OEM Mazda 6 parts. Enjoy the highly competitive prices online. Our site is your one-stop shop. Each genuine 6 part includes a manufacturer's warranty. Buy with confidence. Our return policy is simple and hassle-free. In a rush? Choose expedited delivery at checkout. You'll love the streamlined experience from search to checkout to receiving your order.

Mazda 6 Bumper Cover Parts and Q&A

Bumper Cover
GP9A-50-221C-BB
Q:
How to remove the front and rear bumper cover on Mazda 6?
A:
Removing the front bumper cover begins by disconnecting the cable off the negative battery terminal. Unscrew the lug nuts in the front wheel, and lift the vehicle and place it on jackstands to be there securely, and then take off the front wheels. Then remove the splash shield mounting fasteners and take off splash shields. Detach the upper mounting clamps of the bumper cover of the radiator support with the exception of 2009 and subsequent models, the rubber hood stops should be removed. To remove bumper cover-to-Fender mounting fastener, pull back the inner fenderwell, and then access the mount mount. Unplug the electrical connector of the marker lights and fog lights, when fitted. Partial Disassemble the bumper cover mounting tabs along upper rear edges out of the lower side of lower edge of front fenders by pulling bumper cover outwards, beginning on fender side then to the middle. Do a final inspection using flashlight to make sure that the bumper cover is fully removed, that all the electrical connectors are disconnected, and that all wiring harnesses are well out of the way. It will be necessary that with help the front bumper cover be removed and then it is the same procedure to install as it was to remove. To remove the rear bumper cover, you will first have to take off the taillight housing assemblies and the bumper cover mounting fasteners. Relax the wheel nuts of the rear and lift the vehicle on jackstands and ensure it is properly supported then remove the rear wheels. Take the mounting fasteners off the underside of the rear bumper cover, and the rear of the wheel wells. Check again with a flashlight to ensure that the bumper cover is fully removed, all electrical connectors are un-plugged and all wiring Harnesses are clear of the workspace. With the help, take off the bumper cover at the rear, but in the case of 2009 and later models, the bumper cover finishes at the fenderwell are pulled outwards to release the mounting clips in the bracket. The opposite of removal is the installation, and it is better to be assisted in placing the bumper cover in the right place.