To reach the tail light lens, first open the trunk floor carpeting mat and then pull out the inferior trunk side trim panel which covers the tail light lens and wheelhousing, but ensure that the trunk side panel is not bent over a lasting duration, otherwise it will become permanently damaged. The second step shall be to disconnect the electrical connectors into the tail light lens, then loosen the nuts of the lens and remove the tail light lens. In the case of the trunk lid tail light lens, the trunk lid trim panel should be removed when it is fitted, and the electrical connector should be detached to the bulb holders, and the mounting nuts of the tail light lens are removed, to remove the tail light lens of the trunk lid. Both components can be so easily installed with the opposite being uninstallation.