Should a Brake Pads be replaced on both wheels at the same time on Mazda 626?

Both wheels should be worked with simultaneously and both disc brake pads replaced one at a time with the other assembled brake serving as a guide in case of necessity. Asbestos dust may be hazardous to health so when handling the brake system be careful of it. to start, unscrew a top of the brake fluid reservoir and siphon, approximately, two ounces of brake fluid into a container to be discarded. Unscrew the bolts of the front wheel, lift the front part of the vehicle, and hold it toughly on jackstands and take out the front wheels. Then drop the two caliper bolts and lift the caliper out of the disc. Take a screwdriver and loosen the clips and remove the outer pad, and then pull off the inner pad of the caliper. Check caliper boot; peel back edge checking that there is no leakage of fluids. Insert the caliper back into the piston until it bottoms out with a C-clamp and insert the inner pad and snap it into the piston. Then insert the outer pad into position and attach it to the caliper before turning the caliper back to position. Connect the bolts and tighten them to the desired torque and then bleed the brakes and finally fix the wheels after which the vehicle should be lowered.

Genuine Mazda 626 Brake Pads

Disc Brake Pad Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Pads found

View related parts
Mazda 626 Brake Pads Part Number: GGYA-33-23ZC
$173.64 MSRP: $231.56
You Save: $57.92 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Set, Front Caliper; Brake Pad, Front Pad, Pad Assembly
- Replaces: GBYH-33-23ZA, GBYH-33-23ZB, GBYH-33-23ZC, GGYA-33-28ZC, GBYH-33-23Z
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1993-2002 Mazda 626 | DX, ES, LX | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mazda 626 Brake Pads Part Number: GAYE-26-49ZA
$37.30 MSRP: $49.74
You Save: $12.44 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Attachment, Pad-Rear; Brake Pad
- Replaces: GAYE-26-49Z
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1998-2002 Mazda 626 | DX, ES, LX | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mazda 626 Brake Pads Part Number: GGYE-33-23ZC
$93.56 MSRP: $124.77
You Save: $31.21 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Set, Front Caliper; Brake Pad, Front Pad
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1998-2002 Mazda 626 | ES, LX | 6 Cyl 2.5 L GAS
View related parts
Mazda 626 Brake Pads Part Number: G5Y6-26-48ZA
$98.35 MSRP: $131.16
You Save: $32.81 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Set, Rear Caliper; Brake Pad, Rear Pad
- Replaces: G5Y6-26-43ZC
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1993-2002 Mazda 626 | DX, ES, LX | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mazda 626 Front Pads Part Number: G1YH-33-28Z-9F
Product Specifications
- Other Name: Pad Set, Front Shims 49-290B; Front Pad
- Position: Front
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1988-1992 Mazda 626 | DX, GT, LE, LX, Turbo, Turbo 4WS | 4 Cyl 2.2 L GAS
View related parts
Mazda 626 Front Pads Part Number: G113-49-280A
Product Specifications
- Other Name: Pad Set, Front Caliper; Front Pad
- Position: Front
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1984-1987 Mazda 626 | DX, GT, LX | 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS

Mazda 626 Brake Pads

The Mazda 626 Brake Pads work by putting pressure on the brake rotors, generating friction to create heat and slow or stop the vehicle. Each pad consists of a metal backing plate that is either bonded or riveted to a molded friction lining, whereby force supplied by a caliper makes two pads work on every rotor. The friction material releases a thin layer to the rotor surface during braking, which creates the grip that transforms kinetic energy into thermal energy while stopping the Mazda under control. As the contact continues, the lining wears gradually, so the manufacturer lays down a minimum safe thickness. Many systems are equipped with electronic or mechanical wear indicators to alert the driver when replacement is required. Once the lining touches the indicator, it can also sound an alarm as it touches the rotor. To help maintain consistent braking performance and to avoid overheating and fade due to thin pads that fail to absorb heat, wear checks should be carried out regularly. The original formulation, although mainly aimed for day-to-day riding and typical town or highway use, still ensures reliable service in the standard 626 with a balanced performance in friction, durability, and noise control. Brake Pads will ensure your brakes work well, the rotor has limited damage, and the pedal has a normal response. This way, you will maintain confident control of your Mazda 626 during normal driving. Replacing worn Brake Pads frequently, therefore, is crucial for any Mazda's continuous braking safety.

Looking for Brake Pads with proven quality? Choose OEM Brake Pads. Mazda designs and builds them to strict factory specs. Every piece goes through rigorous quality checks. You'll get parts that fit right and work like new. Shop our huge inventory of OEM Mazda 626 parts. Enjoy the highly competitive prices online. Our site is your one-stop shop. Each genuine 626 part includes a manufacturer's warranty. Buy with confidence. Our return policy is simple and hassle-free. In a rush? Choose expedited delivery at checkout. You'll love the streamlined experience from search to checkout to receiving your order.

Mazda 626 Brake Pads Parts and Q&A

Front Pads
G113-49-280A
Q:
Should a Brake Pads be replaced on both wheels at the same time on Mazda 626?
A:
Both wheels should be worked with simultaneously and both disc brake pads replaced one at a time with the other assembled brake serving as a guide in case of necessity. Asbestos dust may be hazardous to health so when handling the brake system be careful of it. to start, unscrew a top of the brake fluid reservoir and siphon, approximately, two ounces of brake fluid into a container to be discarded. Unscrew the bolts of the front wheel, lift the front part of the vehicle, and hold it toughly on jackstands and take out the front wheels. Then drop the two caliper bolts and lift the caliper out of the disc. Take a screwdriver and loosen the clips and remove the outer pad, and then pull off the inner pad of the caliper. Check caliper boot; peel back edge checking that there is no leakage of fluids. Insert the caliper back into the piston until it bottoms out with a C-clamp and insert the inner pad and snap it into the piston. Then insert the outer pad into position and attach it to the caliper before turning the caliper back to position. Connect the bolts and tighten them to the desired torque and then bleed the brakes and finally fix the wheels after which the vehicle should be lowered.