How to remove and install the sway bar on Mazda 626?

Lift the car and place it on jackstands safely after which, take the front wheels and splash shields off the front stabilizer bar. Then remove stabilizer bar-to-suspension arm bolts, then the bushing bolts and the bracket bolts and take off the rear stabilizer bar of the car. In the case of the front stabilizer bar, loosen the rack and pinion assembly with retaining bolts, get the assembly up, and ensure that you get the bar out through the left wheel well. Check the bushings to determine whether there is any hardening, cracking, or excessive wear and replace them as required. Install the stabilizer bar, with the bushing alignment mark positioned to the left of the car, and install the front stabilizer bar left side bushing with the edge of the bushing directed to the mark and the notch to the rear. Installation of the bushing bracket bolts is completed after which tightening to the recommended torque is done and the end bolts and nuts installed and tightened.

Genuine Mazda 626 Sway Bar

Sway Bar Kit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Sway Bars found

View related parts
Mazda 626 Stabilizer Bar Part Number: G211-34-151B
Product Specifications
- Other Name: Stabilizer, Front
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1988-1992 Mazda 626 | DX, GT, LE, LX, Turbo, Turbo 4WS | 4 Cyl 2.2 L GAS
View related parts
Mazda 626 Stabilizer Bar Part Number: GA5R-28-151
Product Specifications
- Other Name: Stabilizer, Rear
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1993-1997 Mazda 626 | DX, ES, LX | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mazda 626 Stabilizer Bar Part Number: GD7E-28-151
Product Specifications
- Other Name: Stabilizer, Rear
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1998-1999 Mazda 626 | DX, ES, LX | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mazda 626 Stabilizer Bar Part Number: GG2A-34-151
Product Specifications
- Other Name: Stabilizer, Front
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2000-2002 Mazda 626 | ES, LX | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Mazda 626 Stabilizer Bar Part Number: GJ21-28-151A
Product Specifications
- Other Name: Stabilizer, Rear
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1991-1992 Mazda 626 | DX, GT, LE, LX | 4 Cyl 2.2 L GAS
View related parts
Mazda 626 Stabilizer Bar Part Number: KA80-34-151
Product Specifications
- Other Name: Stabilizer, Front
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 1998-1999 Mazda 626 | DX, ES, LX | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS

Mazda 626 Sway Bar

Looking for Sway Bar with proven quality? Choose OEM Sway Bar. Mazda designs and builds them to strict factory specs. Every piece goes through rigorous quality checks. You'll get parts that fit right and work like new. Shop our huge inventory of OEM Mazda 626 parts. Enjoy the highly competitive prices online. Our site is your one-stop shop. Each genuine 626 part includes a manufacturer's warranty. Buy with confidence. Our return policy is simple and hassle-free. In a rush? Choose expedited delivery at checkout. You'll love the streamlined experience from search to checkout to receiving your order.

Mazda 626 Sway Bar Parts and Q&A

Stabilizer Bar
GJ21-28-151A
Q: How to remove and install the sway bar on Mazda 626?
A:
Lift the car and place it on jackstands safely after which, take the front wheels and splash shields off the front stabilizer bar. Then remove stabilizer bar-to-suspension arm bolts, then the bushing bolts and the bracket bolts and take off the rear stabilizer bar of the car. In the case of the front stabilizer bar, loosen the rack and pinion assembly with retaining bolts, get the assembly up, and ensure that you get the bar out through the left wheel well. Check the bushings to determine whether there is any hardening, cracking, or excessive wear and replace them as required. Install the stabilizer bar, with the bushing alignment mark positioned to the left of the car, and install the front stabilizer bar left side bushing with the edge of the bushing directed to the mark and the notch to the rear. Installation of the bushing bracket bolts is completed after which tightening to the recommended torque is done and the end bolts and nuts installed and tightened.