Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Contact Us Help Center

Genuine Mazda B2200 Wiper Motor

Windshield Wiper Motors
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wiper Motor found

  • Mazda B2200 Wiper Motor - UB39-67-345B
    Diagram for Mazda B2200 Wiper Motor - UB39-67-345B
    View related parts

    Mazda B2200 Motor Part Number: UB39-67-345B

    Product Specifications
    • Other Name: Motor, Wiper; Wiper Motor
    • Warranty: This genuine part is guaranteed by Mazda's factory warranty.
    Fits the following Vehicles:
    • 1987-1993 Mazda B2200 | Base, LE-5, LX, SE-5 | 4 Cyl 2.2 L GAS

Mazda B2200 Wiper Motor

Mazda B2200 Wiper Motor is electrical equipment that powers the windshield wiper blades to provide clear visibility during rain or snow. This compact electric unit, mounted under the hood, contains a worm gear that converts the motor's rotation into the back and forth movement that cleans the water from the glass. On Mazda trucks, the internal gearing multiplies torque so that the blades move with ease despite heavy water loads that resist their action. The driver can adapt the speed of the blades to weather conditions with several different settings, from an intermittent pass that is gentle to a faster, continuous sweep that requires no effort. Electrical signals from the dash switch energize the armature, causing the worm gear connected to the crank mechanism to rotate. This linkage pushes the wiper arms across the windshield, reverses, and returns for the return stroke. The Wiper Motor housing is made of durable materials and shields moisture as well as road debris away from the motor and gear assembly. Moreover, this is helpful in ensuring that there is consistent performance for longer periods of on and off use. If the electrical connections fail or the internal parts of a motor wear out, it will display symptoms like not moving silently, being very noisy, or running at erratic speeds, which indicates that power is not reaching the unit properly or the gear set is failing. The system works using the Mazda washer pump, which permits the delivery of fluid onto the glass so that dirt and water may also be wiped off. The Wiper Motor still plays an essential part in the safe operation, and with a healthy Wiper Motor, the windshield will stay clear whenever the Mazda B2200 encounters adverse conditions.

Looking for Wiper Motor with proven quality? Choose OEM Wiper Motor. Mazda designs and builds them to strict factory specs. Every piece goes through rigorous quality checks. You'll get parts that fit right and work like new. Shop our huge inventory of OEM Mazda B2200 parts. Enjoy the highly competitive prices online. Our site is your one-stop shop. Each genuine B2200 part includes a manufacturer's warranty. Buy with confidence. Our return policy is simple and hassle-free. In a rush? Choose expedited delivery at checkout. You'll love the streamlined experience from search to checkout to receiving your order.

Mazda B2200 Wiper Motor Parts and Q&A

  • Mazda B2200 Wiper Motor - UB39-67-345B Motor Motor
    UB39-67-345B
    Q:
    How to remove and install Wiper Motor on Mazda B2200?
    A:
    The wiper components are removed and installed in the same order; begin by removing the Wiper Arm/blade assembly and make sure not to mix the various arms. Then take off the rubber seal along the front of the cowl, screw up the cowl and strip away the access hole covers. Loosen the bolts attaching the motor drive screws of the wiper shaft, mark the location of the wiper crank arm with a mark relative to the wiper motor and unassemble the wiper connection. Removal of the wiper motor with disconnection of the wiring harness after removing the wiper linkage, unbolt, and remove the wiper motor. To install, reverse the steps of taking out, and make sure that the height of the wiper arm is 0.787 inch (20mm) when parked, and secure the arm retaining nuts, 8-10 ft. lbs. (11-14Nm). To reach the front of the MPV, take off the wiper arms, drive link nuts, disconnect the battery ground cable and pull out the motor and linkage assembly. Assuming that you can, leave the motor arm attached to retain the automatic Park position. To disassemble the rear, unscrew battery ground cable, pull off protective cap and wiper arm nut then remove wiper arm, seal and bushing. Take out the inner trim panels and the weathershield, disassemble the wiper motor wiring and remove the motor by removing the mounting bolts. to start-up the Navajo, the front wiper switch and ignition should be turned on to set the blades and the negative battery cable and the right wiper arm should be removed. Take out the right pivot nut, the linkage access cover and unsnapping the wiper motor clip disconnects the linkage. Unhook the motor wiring, disassemble the motor and to install, fix the motor using screws, hook the wiring and make sure that the connection is secure. Install back the wiper pivot shaft and nut on right and reconnect the battery and ensure the system has started working again. To take the rear of off, unscrew the negative battery cable, de-fit the wipers arm and blade, pull up the interiors trim, unscrew the motor bolts, and the electrical connections then replace the motor and reassemble.

Related Mazda B2200 Parts

Browse by Year

+
1993 Wiper Motor 1992 Wiper Motor 1991 Wiper Motor 1990 Wiper Motor 1989 Wiper Motor 1988 Wiper Motor 1987 Wiper Motor