×
- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Mazda Parts
My Garage
My Account
Cart
Genuine Mazda Millenia Windshield Wiper Arms
Wiper Arm- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Windshield Wiper Arms found
Mazda Millenia Wiper Arm Part Number: TA01-67-321B
$86.59 MSRP: $115.47You Save: $28.88 (26%)Ships in 1-2 Business DaysMazda Millenia Wiper Arm Part Number: TA02-67-321B
$14.55 MSRP: $19.10You Save: $4.55 (24%)Ships in 1-2 Business Days
Mazda Millenia Windshield Wiper Arms
Looking for Windshield Wiper Arms with proven quality? Choose OEM Windshield Wiper Arms. Mazda designs and builds them to strict factory specs. Every piece goes through rigorous quality checks. You'll get parts that fit right and work like new. Shop our huge inventory of OEM Mazda Millenia parts. Enjoy the highly competitive prices online. Our site is your one-stop shop. Each genuine Millenia part includes a manufacturer's warranty. Buy with confidence. Our return policy is simple and hassle-free. In a rush? Choose expedited delivery at checkout. You'll love the streamlined experience from search to checkout to receiving your order.
Mazda Millenia Windshield Wiper Arms Parts and Q&A
- Q: How to remove and install Windshield Wiper Arms and Wiper Blades on Mazda Millenia?A:In order to dismantle the wiper arms that are on the front, raise the cover (where applicable), take off the retaining nut, and loosen the arm and blade assembly out of the pivot shaft, and then lower the wiper blade out of the wiper arm. To install, fit the wiper blade on the wiper arm and switch the wiper ON to have the motor complete 3-4 cycles of the pivot shafts and then switch off. Install the arm and blade assembly such that the tip of the wiper blade is 0.79-1.18 in. (20-30mm) below the bottom of the windshield, and then install and tighten the retaining nut to 7-10 ft. lbs. (10-14Nm). Test the wipers by switching them on and off a few times and retorque the retaining nut by ensuring the windshield wiper arm is raised at right angles to the pivot shaft so as to ensure the splines are seated in place. In the case of the rear wiper arm, lift the cover, unscrew the retaining nut and remove the arm and blade assembly, then scrape the wiper blade off the wiper arm. Installation To install, screw in wiper blade on wiper arm, switch wiper ON, cycle motor 3-4 times and switch off. Install and secure the retaining nut by ensuring the tip of the wiper blade is 0.79-1.18 in. (20-30mm) under the bottom of the rear window and then attaching and tightening the arm and blade assembly.
