How to remove and install the cooling fan assembly on Mazda MX-5 Miata?

In the case of 2005 and previous models, the first step is to disconnect the negative battery cable followed by the air intake duct. Then, unconnection of the wiring connector at the fan motor, unbolt the left radiator fan shroud, lift the fan assembly out of the engine compartment prior to unbolt and removal of the right condenser fan assembly. When holding the fan blades, loosen the fan retaining nut and remove the fan off the fan motor, after which the fan motor off the fan shroud. To install it, do the reverse of the steps to remove it, with mounting bolts of the fan shroud and air intake duct being tightened. In 2006 and later models, you need to begin by unplugging the cable on the negative battery terminal followed by lifting the vehicle up and positioning it on jackstands to remove the engine compartment under-cover. Empty the engine coolant, disconnect the battery and the battery tray, and finally disconnect the battery cooling duct. The second step is to take out the air filter housing then the Powertrain Control Module and the cooling duct. The cooling reservoir should be removed, electrical connector on the fan motor removed, and, in case of an automatic transmission, the ATF cooler hose. Take out the cooling fan shroud and cooling fan motor as a complete unit and then as needed, take out the fan motor or fan of the cooling fan part. To install, reverse the order of removing.

Genuine Mazda MX-5 Miata Cooling Fan Assembly

Engine Cooling Fan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Cooling Fan Assemblys found

View related parts
Mazda MX-5 Miata Fan Blade Part Number: LFG1-15-140
$55.23 MSRP: $73.64
You Save: $18.41 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan, Cooling
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2006-2015 Mazda MX-5 Miata | 25th Anniversary Edition, Base, Club, Club Spec, Grand Touring, Special Edition, Sport, SV, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda MX-5 Miata Fan Blade Part Number: P51N-15-140
$87.23 MSRP: $116.33
You Save: $29.10 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan, Cooling
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2016-2023 Mazda MX-5 Miata | 100th Anniversary Special Edition, Club, Grand Touring, RF 100th Anniversary Special Edition, RF Club, RF Grand Touring, RF GT, Sport | 4 Cyl 2.0 L GAS
View related parts
Mazda MX-5 Miata Fan Assembly Part Number: LFG1-15-025F
$414.40 MSRP: $557.10
You Save: $142.70 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan, Electric; Fan Assembly
- Replaces: LFG1-15-025C
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2006-2015 Mazda MX-5 Miata | 25th Anniversary Edition, Base, Club, Club Spec, Grand Touring, Special Edition, Sport, SV, Touring | 4 Cyl 2.0 L GAS
View related parts
Mazda MX-5 Miata Fan Assembly Part Number: P51N-15-025
$523.65 MSRP: $703.97
You Save: $180.32 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan, Electric; Fan Module
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2016-2023 Mazda MX-5 Miata | 100th Anniversary Special Edition, Club, Grand Touring, RF 100th Anniversary Special Edition, RF Club, RF Grand Touring, RF GT, Sport | 4 Cyl 2.0 L GAS
View related parts
Mazda MX-5 Miata Fan Assembly Part Number: PEFB-15-025
$523.65 MSRP: $703.97
You Save: $180.32 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan, Electric; Fan Module
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2016-2023 Mazda MX-5 Miata | 100th Anniversary Special Edition, Club, Grand Touring, RF 100th Anniversary Special Edition, RF Club, RF Grand Touring, RF GT, Sport | 4 Cyl 2.0 L GAS

Mazda MX-5 Miata Cooling Fan Assembly

Looking for Cooling Fan Assembly with proven quality? Choose OEM Cooling Fan Assembly. Mazda designs and builds them to strict factory specs. Every piece goes through rigorous quality checks. You'll get parts that fit right and work like new. Shop our huge inventory of OEM Mazda MX-5 Miata parts. Enjoy the highly competitive prices online. Our site is your one-stop shop. Each genuine MX-5 Miata part includes a manufacturer's warranty. Buy with confidence. Our return policy is simple and hassle-free. In a rush? Choose expedited delivery at checkout. You'll love the streamlined experience from search to checkout to receiving your order.

Mazda MX-5 Miata Cooling Fan Assembly Parts and Q&A

Fan Assembly
LFG1-15-025F
Q: How to remove and install the cooling fan assembly on Mazda MX-5 Miata?
A:
In the case of 2005 and previous models, the first step is to disconnect the negative battery cable followed by the air intake duct. Then, unconnection of the wiring connector at the fan motor, unbolt the left radiator fan shroud, lift the fan assembly out of the engine compartment prior to unbolt and removal of the right condenser fan assembly. When holding the fan blades, loosen the fan retaining nut and remove the fan off the fan motor, after which the fan motor off the fan shroud. To install it, do the reverse of the steps to remove it, with mounting bolts of the fan shroud and air intake duct being tightened. In 2006 and later models, you need to begin by unplugging the cable on the negative battery terminal followed by lifting the vehicle up and positioning it on jackstands to remove the engine compartment under-cover. Empty the engine coolant, disconnect the battery and the battery tray, and finally disconnect the battery cooling duct. The second step is to take out the air filter housing then the Powertrain Control Module and the cooling duct. The cooling reservoir should be removed, electrical connector on the fan motor removed, and, in case of an automatic transmission, the ATF cooler hose. Take out the cooling fan shroud and cooling fan motor as a complete unit and then as needed, take out the fan motor or fan of the cooling fan part. To install, reverse the order of removing.