How to remove and install a water pump on 1997 Mazda MPV?

Disconnect negative battery cable. On V6 set cylinder at TDC. Remove belts, drain coolant, remove fan/shroud/pulley and timing belt. Unbolt and remove pump, tapping if stuck. Clean threads and mating surfaces, confirm new pump matches old; fit gasket with RTV, secure and tighten, reinstall, refill system and check for leaks.

Genuine 1997 Mazda MPV Water Pump

H2O Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Water Pump found

View related parts
1997 Mazda MPV Water Pump Part Number: JE96-15-010R-MB
Product Specifications
- Other Name: Reman, Pump, Water; Water Pump, Water Pump Assembly
- Item Weight: 3.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: JE96-15-010R-MB
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 1997 Mazda MPV Submodels:
- DX, ES, L, LX, LXE | 6 Cyl 3.0 L GAS

1997 Mazda MPV Water Pump Parts and Q&A

Q: How to remove and install a water pump on 1997 Mazda MPV?
A: Disconnect negative battery cable. On V6 set cylinder at TDC. Remove belts, drain coolant, remove fan/shroud/pulley and timing belt. Unbolt and remove pump, tapping if stuck. Clean threads and mating surfaces, confirm new pump matches old; fit gasket with RTV, secure and tighten, reinstall, refill system and check for leaks.