How to properly remove and replace a car Battery Trays and Batteries on 2006 Mazda 6?

Disconnect negative cable first, then positive. Remove hold-down clamp and insulator if fitted, then lift out the batteries; use straps if needed. Remove tray fasteners and tray. If replacing, fit identical batteries and transfer the heat shield. Reinstall in reverse, connecting positive first, negative last.

Genuine 2006 Mazda 6 Battery Trays

Battery Tray

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Battery Trays found

View related parts
2006 Mazda 6 Battery Tray Part Number: G21D-56-040B
Product Specifications
- Other Name: Carrier, Battery
- Item Weight: 2.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: G21D-56-040B
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 2006 Mazda 6 Submodels:
- Mazdaspeed | 4 Cyl 2.3 L GAS
View related parts
2006 Mazda 6 Tray Part Number: GK2A-56-040D
Product Specifications
- Other Name: Tray, Battery
- Item Weight: 2.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: GK2A-56-040D
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 2006 Mazda 6 Submodels:
- i | 4 Cyl 2.3 L GAS
View related parts
2006 Mazda 6 Tray Part Number: GK2A-56-041D
Product Specifications
- Other Name: Tray, Battery
- Item Weight: 2.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: GK2A-56-041D
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 2006 Mazda 6 Submodels:
- S | 6 Cyl 3.0 L GAS

2006 Mazda 6 Battery Trays Parts and Q&A

Q: How to properly remove and replace a car Battery Trays and Batteries on 2006 Mazda 6?
A: Disconnect negative cable first, then positive. Remove hold-down clamp and insulator if fitted, then lift out the batteries; use straps if needed. Remove tray fasteners and tray. If replacing, fit identical batteries and transfer the heat shield. Reinstall in reverse, connecting positive first, negative last.