How to remove and install the blower motor resistor and blower motor on 2006 Mazda 6?

Remove lower trim panel under glove box; on older models remove glove box. Disconnect blower motor resistor connector, remove screws and withdraw resistor from evaporator housing. On later models depress top tab and slide resistor (manual) or transistor (automatic) right. Disconnect blower motor connector, remove screws and motor. Install reverse.

Genuine 2006 Mazda 6 Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Blower Motors found

View related parts
2006 Mazda 6 Blower Motor Part Number: GP9E-61-B10
$47.29 MSRP: $62.08
You Save: $14.79 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor, Fan-Blower Unit; Fan & Motor
- Item Weight: 3.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: GP9E-61-B10
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 2006 Mazda 6 Submodels:
- Mazdaspeed | 4 Cyl 2.3 L GAS
View related parts
2006 Mazda 6 Blower Motor Part Number: GKKT-61-B10
Product Specifications
- Other Name: Motor, Fan/Blower
- Item Weight: 3.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: GKKT-61-B10
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 2006 Mazda 6 Submodels:
- i, Mazdaspeed, S | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
2006 Mazda 6 Blower Assembly Part Number: GP9E61140B
Product Specifications
- Other Name: Blower Unit
- Item Weight: 7.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: GP9E61140B
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 2006 Mazda 6 Submodels:
- Mazdaspeed | 4 Cyl 2.3 L GAS

2006 Mazda 6 Blower Motor Parts and Q&A

Q: How to remove and install the blower motor resistor and blower motor on 2006 Mazda 6?
A: Remove lower trim panel under glove box; on older models remove glove box. Disconnect blower motor resistor connector, remove screws and withdraw resistor from evaporator housing. On later models depress top tab and slide resistor (manual) or transistor (automatic) right. Disconnect blower motor connector, remove screws and motor. Install reverse.