How to properly discharge and replace the A/C Accumulator in an automotive air conditioning system on 2008 Mazda Tribute?

Also be sure that before going further, dump air conditioner system by a dealer or automotive shop. Disassemble the required lines and strip away the A/C Accumulator or receiver/drier and make all O-rings with fresh ones that had been sprayed with refrigerant oil. Lastly, the shop should evacuate, recharge and test leak in the system.

Genuine 2008 Mazda Tribute A/C Accumulator

Accumulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 A/C Accumulators found

View related parts
2008 Mazda Tribute Drier Part Number: ZZDA-61-500
$51.03 MSRP: $68.05
You Save: $17.02 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank, Liquid; Accumulator
- Replaces: ZZCA-61-500
- Item Weight: 1.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: ZZDA-61-500
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
More Info
Fits the following 2008 Mazda Tribute Submodels:
- Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
2008 Mazda Tribute Drier Part Number: ZZC0-61-500A
Product Specifications
- Other Name: Tank, Liquid (With Shield); Accumulator
- Item Weight: 2.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: ZZC0-61-500A
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 2008 Mazda Tribute Submodels:
- i, S | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

2008 Mazda Tribute A/C Accumulator Parts and Q&A

Q: How to properly discharge and replace the A/C Accumulator in an automotive air conditioning system on 2008 Mazda Tribute?
A: Also be sure that before going further, dump air conditioner system by a dealer or automotive shop. Disassemble the required lines and strip away the A/C Accumulator or receiver/drier and make all O-rings with fresh ones that had been sprayed with refrigerant oil. Lastly, the shop should evacuate, recharge and test leak in the system.