How to remove and install the Crankshaft Position Sensor on 2010 Mazda 3?

To install the CKP sensor, first disconnection of the negative battery terminal, secondly, loosen lug nuts of right front wheel and third, raise the vehicle on jack stands. Install the No.1 cylinder at TDC, unscrew the mounting bolts, disconnect the CKP sensor. To install, place the new sensor using a jig or mark, tighten the bolts and re-fit the cylinder block plug.

Genuine 2010 Mazda 3 Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Crankshaft Position Sensors found

View related parts
2010 Mazda 3 Crankshaft Position Sensor Part Number: L3G2-18-221
$66.78 MSRP: $89.05
You Save: $22.27 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crankshaft Position; Crankshaft Sensor
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: L3G2-18-221
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 2010 Mazda 3 Submodels:
- i, Mazdaspeed, S | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
2010 Mazda 3 Crankshaft Position Sensor Part Number: L3K9-18-221A
$82.31 MSRP: $109.77
You Save: $27.46 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crankshaft Position; Camshaft Sensor, Crankshaft Sensor
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: L3K9-18-221A
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following 2010 Mazda 3 Submodels:
- Mazdaspeed, S | 4 Cyl 2.3 L GAS

2010 Mazda 3 Crankshaft Position Sensor Parts and Q&A

Q: How to remove and install the Crankshaft Position Sensor on 2010 Mazda 3?
A: To install the CKP sensor, first disconnection of the negative battery terminal, secondly, loosen lug nuts of right front wheel and third, raise the vehicle on jack stands. Install the No.1 cylinder at TDC, unscrew the mounting bolts, disconnect the CKP sensor. To install, place the new sensor using a jig or mark, tighten the bolts and re-fit the cylinder block plug.