Is removing and installing a blower motor and blower motor resistor challenging for home mechanics on Mazda 3?

This is not easy to undertake by home mechanics because of obscure fasteners, and difficult angles, and is best left to those of the more experienced do-it-yourselfers. When the blower motor is being removed, one should take a note of each part assembled in an orderly way, and this will make it easy to assemble the user again. Start by removing the battery cover and the negative battery terminal. The next step is to remove the steering column covers and instrument cluster, then remove the driver side scuff plate, kick panel, knee bolster, and the instrument cluster trim panel. Disconnect and pull out the steering shaft and the accelerator pedal pedal position sensor and then the brake pedal. Take out the resistor, disconnect the electrical connector with the resistor on the blower motor, remove the screws that hold it in place, and remove the resistor. On the blower motor removal, at least two persons are advisable so that no damage is caused to the fan. The ignition should be turned on, the A/C should be turned on to the FRESH air mode and the key should be switched off. Deassemble blower motor resistor, instrument panel trim strips, glove box assembly and Passenger Junction Box. Disassembly: Unscrew the radio and auto leveling control module and remove the floor air duct and remove the temporary steering stay when needed. Identify the blower case and air intake actuator and delete the blower case mounting screws as well as unplug the air intake actuator connector. Pinch the case of the blower a little forward, turn it around the firewall and take out the whole assembly. Take out the air guide of the evaporator housing and then insert a special tool on the blower motor. On the driver side, remove the electrical connector and the blower motor cooling tube, then pull the blower motor cover using the tab and turn it clockwise. Hold blower motor with an assistant to ensure that it does not fall into the evaporator case. Very carefully remove blower motor assembly. To install, insert the special service tool in the blower motor and insert the assembly in the housing, making sure that it is placed correctly. Install blower cover and press the locking tab and turn anticlockwise till it clips. Lastly, take off the special service tool and do the installation in that order.

Genuine Mazda 3 Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Blower Motors found

View related parts
Mazda 3 Blower Motor Part Number: BDTS-61-B10
$115.56 MSRP: $154.12
You Save: $38.56 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor, Fan-Blower Unit; Blower Motor
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2019-2024 Mazda 3 | 2.0, 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Blower Motor Part Number: BP4K-61-B10
$175.94 MSRP: $234.63
You Save: $58.69 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor, Fan-Blower Unit
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2004-2009 Mazda 3 | i, Mazdaspeed, S, SP23 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Mazda 3 Blower Motor Part Number: BBP2-61-B10
$204.93 MSRP: $273.28
You Save: $68.35 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor, Fan-Blower Unit
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2013 Mazda 3 | i, Mazdaspeed, S | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Blower Motor Part Number: BBM4-61-B10
$217.53 MSRP: $290.09
You Save: $72.56 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor, Fan-Blower Unit
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2010-2012 Mazda 3 | i, Mazdaspeed, S | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Blower Assembly Part Number: BANP-61-140
$232.06 MSRP: $309.48
You Save: $77.42 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blower Unit; Blower Assembly
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2017-2018 Mazda 3 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Blower Assembly Part Number: BDTS-61-140A
$232.08 MSRP: $309.49
You Save: $77.41 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blower Unit; Blower Assembly
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2019-2024 Mazda 3 | 2.0, 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Blower Motor Part Number: BDGF-61-B10
$236.03 MSRP: $314.76
You Save: $78.73 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor, Fan-Blower Unit; Blower Motor
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2019-2024 Mazda 3 | 2.0, 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Blower Assembly Part Number: BJS7-61-140
$229.94 MSRP: $306.64
You Save: $76.70 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blower Unit
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2014-2016 Mazda 3 | i Grand Touring, I Sport, i SV, I Touring, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Blower Motor Part Number: KD45-61-B10
$246.21 MSRP: $328.36
You Save: $82.15 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor, Fan-Blower Unit; Door Actuator
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2014-2018 Mazda 3 | Grand Touring, i Grand Touring, I Sport, i SV, I Touring, s Grand Touring, s Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Blower Assembly Part Number: BHS2-61-140
$251.76 MSRP: $335.76
You Save: $84.00 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blower Unit
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2014-2016 Mazda 3 | i Grand Touring, I Sport, i SV, I Touring, s Grand Touring, s Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Blower Assembly Part Number: BAFA-61-140
$279.86 MSRP: $373.22
You Save: $93.36 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blower Unit; Blower Assembly
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2017-2018 Mazda 3 | Grand Touring, Sport, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Mazda 3 Blower Assembly Part Number: BDGF-61-140A
$310.08 MSRP: $413.52
You Save: $103.44 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blower Unit; Blower Assembly
- Replaces: BDGF-61-140
- Warranty: This genuine part is guaranteed by Mazda's factory warranty.
Fits the following Vehicles:
- 2019-2024 Mazda 3 | 2.0, 2.5 Carbon Turbo, 2.5 S, 2.5 Turbo, 2.5 Turbo Premium Plus, Base, Carbon Edition, Preferred, Premium, Select, Select Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS

Mazda 3 Blower Motor

The Mazda 3 Blower Motor lets the driver quickly adjust the cabin temperature by turning the fan on, which will force cool or warm air into the vents, removing hazy glass in winter and providing relief on a sweltering afternoon. The HVAC is fitted with a small Blower Motor system, which is commanded by the dash-mounted controls, whose knobs or buttons channel their output via a small electronic control system and the wiring harness. When the dial is twisted or a switch is pressed, the module changes the voltage and allows the motor to rotate faster or slower to allow airflow to match the weather and your comfort level. Since the module is an electrical card, electrical faults, frayed wires or ripped plastic knobs may deprive the driver of airflow control, and the symptoms become evident as soon as the air conditioning or heat refuses to accelerate. The Mazda 3 does not require having dual motors as applied by large SUVs; the single front unit is applied, which has made designing it uncomplicated and the weight minimal. In the years of production, Mazda retained the principle unchanged, a reliable electric motor connected to a control module, and therefore the changes were dedicated to slight adjustments to the wiring patterns rather than completely new hardware. Regular care of the control module and the connection allows the motor to survive, as the motor is stable but requires clean voltage. When the controls are working, the Blower Motor keeps the windows clear, the ventilation and comfort in the entire cabin steady and is a significant benefit in the everyday commute to work in any Mazda.

Looking for Blower Motor with proven quality? Choose OEM Blower Motor. Mazda designs and builds them to strict factory specs. Every piece goes through rigorous quality checks. You'll get parts that fit right and work like new. Shop our huge inventory of OEM Mazda 3 parts. Enjoy the highly competitive prices online. Our site is your one-stop shop. Each genuine 3 part includes a manufacturer's warranty. Buy with confidence. Our return policy is simple and hassle-free. In a rush? Choose expedited delivery at checkout. You'll love the streamlined experience from search to checkout to receiving your order.

Mazda 3 Blower Motor Parts and Q&A

Blower Motor
BBM4-61-B10
Q: Is removing and installing a blower motor and blower motor resistor challenging for home mechanics on Mazda 3?
A:
This is not easy to undertake by home mechanics because of obscure fasteners, and difficult angles, and is best left to those of the more experienced do-it-yourselfers. When the blower motor is being removed, one should take a note of each part assembled in an orderly way, and this will make it easy to assemble the user again. Start by removing the battery cover and the negative battery terminal. The next step is to remove the steering column covers and instrument cluster, then remove the driver side scuff plate, kick panel, knee bolster, and the instrument cluster trim panel. Disconnect and pull out the steering shaft and the accelerator pedal pedal position sensor and then the brake pedal. Take out the resistor, disconnect the electrical connector with the resistor on the blower motor, remove the screws that hold it in place, and remove the resistor. On the blower motor removal, at least two persons are advisable so that no damage is caused to the fan. The ignition should be turned on, the A/C should be turned on to the FRESH air mode and the key should be switched off. Deassemble blower motor resistor, instrument panel trim strips, glove box assembly and Passenger Junction Box. Disassembly: Unscrew the radio and auto leveling control module and remove the floor air duct and remove the temporary steering stay when needed. Identify the blower case and air intake actuator and delete the blower case mounting screws as well as unplug the air intake actuator connector. Pinch the case of the blower a little forward, turn it around the firewall and take out the whole assembly. Take out the air guide of the evaporator housing and then insert a special tool on the blower motor. On the driver side, remove the electrical connector and the blower motor cooling tube, then pull the blower motor cover using the tab and turn it clockwise. Hold blower motor with an assistant to ensure that it does not fall into the evaporator case. Very carefully remove blower motor assembly. To install, insert the special service tool in the blower motor and insert the assembly in the housing, making sure that it is placed correctly. Install blower cover and press the locking tab and turn anticlockwise till it clips. Lastly, take off the special service tool and do the installation in that order.